The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Systems > CORSAIR ONE

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 10-23-2019, 03:06 AM
Lakristomten Lakristomten is offline
Registered User
Lakristomten's PC Specs
 
Join Date: Sep 2019
Posts: 10
POST ID # = 1022111
Lakristomten Reputation: 10
Default Corsair i160 OC settings?

9900k, liquid cooled
RTX2080TI, liquid cooled
32GB 2666 DDR4
480gb M.2
z370i mini-ITX
SF600, 80 plus Gold
W10

BIOS:
2.QJ 05/22/2019

Anyone OC this prebuild, what is your settings?
Reply With Quote


  #2  
Old 10-23-2019, 03:27 AM
Lakristomten Lakristomten is offline
Registered User
Lakristomten's PC Specs
 
Join Date: Sep 2019
Posts: 10
POST ID # = 1022114
Lakristomten Reputation: 10
Default Anyone Overclocked the i160, share stats settings?

Hello

Searching OC settings for the i160 built.

I've used a general MSI guide and followed up a CPU bench with 3dmarks TIMESPY.

However I am not liking the result with manually OC.

These are the following steps I've taken from a MSI guide on youtube.


1. OC Explore Mode Set to [Expert]

CPU Ratio Apply Mode [All Core]
CPU Ratio 50

CPU Ratio Mode [Fixed Mode] All Run at 5Ghz no matter what for system stability
CPU Ratio Offset When Running AVX [-3] Tip from the guide

2.

DigitALL Power>

CPU Loadline Calibration Control [Mode 4] Perfect no matter what load see diagram rightside in bios

3.

CPU Core Voltage 1.320
CPU SA Voltage 1.200
CPU IO Voltage 1.200

DRAM Voltage 1.360

4.

Overclocking\CPU Features

Intel C-State [Disable] (Power saving mode)

Alternative that has been applied and followed

CPU Ring Ratio 47 3 under
CPU Core Voltage Mode "override och auto (same?)

-

I haven't set a throttling temperature - should I?

My temperature with the fan curve is a bit weird, the CORE0 is higher than the others and overallt the temps jumps a bit.

Looking at the HW monitor the voltage of i9900k jumps between 1.215(4)-1.3.

-

3DMARKSCORE TIMESPY CUSTOM
-GPU
-DEMO

Results:

1. STOCK

3DMark CPU test score 9 057 (3.6Ghz) 9169 with XMP enable

2. Game Boost

3DMark CPU test score 10 426 (4.8Ghz / 4000Ghz in the end) 10 242 with XMP enable

3. Enhanced Turbo + XMP

CPU-Z (5GHZ Singel thread 582.3 Multiply thread5050.1
3DMark CPU test score 10 575 (5GHZ dropped too 4.4 then back up too 5GHZ)

4. 5Ghz Overclock + XMP

CPU-Z (5GHZ ST 587.9 MT 5242.3/ 3DMark CPU test score 8 784 (It went down to lower rates aswell)

I am looking for a 5-5.2 overclock if possible. Any suggestions, guidelines is appreciated.
Also something I noticed is with the XMP enable, my stats at CPU-Z memory I dont think it works, dont know what value I should see but should it not be, show more(doubble) than 1333 in DRAM freq?

/Cheers

Last edited by Lakristomten; 10-23-2019 at 03:30 AM.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.