The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > iCUE Software

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 07-29-2018, 12:50 PM
JC-K952016 JC-K952016 is offline
Registered User
JC-K952016's PC Specs
 
Join Date: Jul 2018
Posts: 1
POST ID # = 966087
JC-K952016 Reputation: 10
Default STRAFE RGB - iCUE software stops working after restart/reboot

I hope this is the right spot in the forum. This appears to be a software issue and not an actual issue with the STRAFE RGB keyboard itself.

I recently (almost 2 weeks ago) built the three systems (identical save the mice, mouse pads, monitors) for my kids and all keyboards share the same problem: the STRAFE RGB lighting effects cease to work after the computer fully boots up. Once the computer is up, I can go to Start-Settings-Apps-Apps & Features-Corsair Utility Engine and select "Modify" and then "Repair" and the keyboard will work fine until the computer is either restarted or rebooted (shutdown then start). The software for the keyboards is ver 3.5.111 and the firmware is ver 2.05. Windows 10 is running build 1803.

I would not say it is a conflict with another device since all computers have the same issue. Even the computer running a generic mouse and standard mouse pad is having this issue. Other than a couple of games and virus scan (Kaspersky), they don't have any extra software installed on the systems.

I've tried uninstalling/installing the keyboard and playing around with the software version it came with (2.24.50), but the same thing happens. The RGB settings fall back to the default red colored keyboard. With ver 2.24.50, when the keyboard falls back to the default red color, I loose all functionality with the CUE software. So the old software wasn't my answer.

I again updated the keyboard software to ver 3.5.111 and everything works fine until I restart/reboot the computer. I can see iCUE kicking in (the selected RGB lighting scheme starts), but after 30 seconds of the desired RGB scheme initiating the keyboard goes back to its default red color. To get the lighting scheme working again I have to go to Start-Settings-Apps-Apps & Features-Corsair Utility Engine and select "Modify" and then "Repair".

I even tried uninstalling the keyboard and then installing Corsair Link 4 first. I saw in a post that unsupported devices needed Corsair Link 4 installed first before moving on to iCUE 3.5.111. By itself the Link 4 software didn't solve my issue, but I thought that maybe the keyboard would work if it was treated like an unsupported device. I then upgraded to iCUE ver 3.5.111. The same RGB issued remained.

I do notice a discrepancy in what appears to be some sort of version number. When I go to Start-Settings-Apps-Apps & Features-Corsair Utility Engine to "Modify" the program I noticed that it has 3.4.95 under the application name "CORSAIR iCUE Software". When I'm in the iCUE software it shows 3.5.111 as the version. I'm going to try to attach a picture showing where the 3.4.95 number is showing up. Is this difference in "versions" an issue?

I'm stuck on where to go now to resolve this issue. Anyone know how to retain the RGB settings on a STRAFE RGB keyboard after a system startup/reboot?
Attached Images
File Type: jpg iCUE 3-4-95.jpg (870.2 KB, 239 views)
Reply With Quote
Reply

Tags
icue stops, lighting, reboot problem, restart problem, strafe rgb

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.