CZHOU Posted June 16, 2020 Share Posted June 16, 2020 Hey Guys: I need help regarding my Corsair Vengeance RGB Pro 32GB (2 x 16GB) RAM Kit (CMW32GX4M2C3200C16). it's a 3200MHz rated speed Memory Kit. The Kit failed to POST with XMP Profile enable on my Intel i7-8700K + Asus Z370 Strix Gaming Platform. it ran fine at SPD Speed 2133MHz, but when you set the memory Speed to 3200MHz or enable XMP, it failed to POST. I tested each Stick from the kit set one by one and found that one unit ran well at 3200MHz and the other failed. I could also reproduce the same result on my friend's 8700K Platform. May i know if corsair warranty cover situation like this ? Thanks in advanced. Link to comment Share on other sites More sharing options...
arcadezyra Posted June 21, 2020 Share Posted June 21, 2020 (edited) this particular kit seems to have issues if you're trying to run it at advertised speeds with xmp. i had the same issue with my kit (same exact kit.) i have a different motherboard (msi z370 gaming plus) but iirc this is a fairly common thing between many boards/manufacturers. you're gonna have to manually input the timings. i doublechecked and they are 16-18-18-36 and set your dram voltage to 1.35 and it should post. the only other thing i could think that could possibly help is doing some research on which bios version you and if there are more current updates for your board. dont update bios if u dont need to though and if you do, just make sure you do it within the bios. alot of boards nowadays have software u can use to update while in windows which makes me scratch my head a bit (dont do it in windows). but ya if those two options dont work then you might have a faulty stick. if i had to put money on it i'd say you just need to manually put in the timings though. good luck Edited June 21, 2020 by arcadezyra Link to comment Share on other sites More sharing options...
Recommended Posts