Chiller's Hybrid SR-2

This build is made possible by and thanks to Aquatuning

http://www.aquatuning.de/bilder/banner/468x60_eng.gif

Xtreme Case Mods

http://i56.tinypic.com/2ijmfky.jpg

IT-Service

http://i56.tinypic.com/14w6oli.jpg

Cooler Master

http://i55.tinypic.com/302p7bq.jpg

Zetix

http://i56.tinypic.com/2qnd0ux.jpg

so i will tell something about myself

i'm from belgium, and like to bench, but done a hole year nothing, last year in december i was 49th of the world on hwbot, now

with the big update i dropped to 240th place or so.

so now is it time to get the cpu pot and dewar for ln² out of the dust and get some more points back

first here are some pic of my rig at the moment that needs to be finished first :

http://i49.tinypic.com/2u6e5wo.jpg

http://i49.tinypic.com/2rwnxpf.jpg

http://i49.tinypic.com/2u8w7wh.jpg

http://i50.tinypic.com/30vhvgh.jpg

http://i50.tinypic.com/15wnipt.jpg

http://i47.tinypic.com/ixthug.jpg

http://i50.tinypic.com/dvka5k.jpg

also needs some red led's in it :

http://i45.tinypic.com/27y5ugj.jpg

http://i50.tinypic.com/1zeea1v.jpg

http://i48.tinypic.com/15oiek8.jpg

http://i50.tinypic.com/1628hty.jpg

Drivebay with a sata cable with red neon :

http://i47.tinypic.com/denzmc.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i30.tinypic.com/33p4jm8.jpg

http://i31.tinypic.com/2uzyqrp.jpg

http://i25.tinypic.com/4ibz4j.jpg

Boreas chiller :

http://i27.tinypic.com/2mq517n.jpg

http://i30.tinypic.com/124h9pu.jpg

http://i28.tinypic.com/1y5lza.jpg

http://i25.tinypic.com/2v0lqpc.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i30.tinypic.com/23wwv1f.jpg

http://i26.tinypic.com/2cqjne8.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i25.tinypic.com/2z9csxv.jpg

http://i28.tinypic.com/8ql4.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i25.tinypic.com/2vt60cn.jpg

http://i32.tinypic.com/orl3rl.jpg

http://i29.tinypic.com/2q3q1ht.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i31.tinypic.com/2ef5ocy.jpg

http://i31.tinypic.com/29ehhnc.jpg

http://i32.tinypic.com/2cda4vt.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i31.tinypic.com/sxi0zb.jpg

http://i28.tinypic.com/se8tjb.jpg

http://i29.tinypic.com/21bu986.jpg

http://i29.tinypic.com/34parg2.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i26.tinypic.com/34zy8ec.jpg

http://i26.tinypic.com/2ed5rug.jpg

http://i32.tinypic.com/2ibkt1i.jpg

http://i32.tinypic.com/148hgro.jpg

http://i31.tinypic.com/jg5buq.jpg

get my custom plexiglas i let make at the lasercutter, new pics will follow tomorrow :

http://i29.tinypic.com/6yfvcj.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i38.tinypic.com/255uibd.jpg

http://i34.tinypic.com/2cducko.jpg

http://i35.tinypic.com/2dr8dx4.jpg

http://i33.tinypic.com/2mrbb5j.jpg

http://i35.tinypic.com/2r7bkwp.jpg

http://i45.tinypic.com/27y5ugj.jpg

change the power for the led's in the Corsair HX1000 psu what i made see tru,

and put the first led's in the 5mm fan shroud for the boreas chiller :

PSU

http://i37.tinypic.com/13ypl4y.jpg

http://i37.tinypic.com/34i5szr.jpg

De Boreas Chiller :

http://i37.tinypic.com/30mmq8h.jpg

http://i38.tinypic.com/e8scxs.jpg

http://i38.tinypic.com/2yxgh3m.jpg

http://i36.tinypic.com/2d8qo9y.jpg

http://i38.tinypic.com/1588e3k.jpg

the boreas chiller is finished, no to the Freezone Elite and Freezone V1. :

new TEC plates in tha house, so now i can finish the Freezone V1 cooler :

http://i36.tinypic.com/efgld2.jpg

http://i34.tinypic.com/5nqky8.jpg

http://i33.tinypic.com/t657pv.jpg

the psu painting in black , de ******** for the TEC's :

http://i34.tinypic.com/5ufznb.jpg

http://i34.tinypic.com/a9pbpf.jpg

http://i45.tinypic.com/27y5ugj.jpg

the Coolit Boreas is finished, now the dual bay psu and the rest of coolers :

http://i38.tinypic.com/8y6opl.jpg

http://i37.tinypic.com/f57uy8.jpg

http://i37.tinypic.com/2ihw7yx.jpg

http://i36.tinypic.com/14brte9.jpg

De ******** dual bay psu is also finished, pianted outside black, and inside silver for putting the light nice out,

only the psu front i need to put back :

http://i33.tinypic.com/2vimssi.jpg

painted because it looked like this in gold :

http://i35.tinypic.com/33p3nr9.jpg

video with how it looks all now :

psu with the front plate ready :

http://i33.tinypic.com/qx2v0n.jpg

http://i38.tinypic.com/2saf8na.jpg

FuFuFuFuFuFuFuFu TMS-200 with expansion board with connectors from UK :

http://i36.tinypic.com/5xiy3n.jpg

http://i36.tinypic.com/23j63nr.jpg

FuFuFuFuFuFuFuFu TMS-200 with expansion board modding :

http://i36.tinypic.com/5xiy3n.jpg

http://i36.tinypic.com/23j63nr.jpg

http://i38.tinypic.com/wlw4xv.jpg

I got some connector to short, need to order more

http://i34.tinypic.com/230101.jpg

http://i45.tinypic.com/27y5ugj.jpg

today i customized the 3D fangrill so it fits on my Coolit Boreas Chiller :

This was how it looks standard :

http://i36.tinypic.com/2n0ltuq.jpg

And after the adjustment, who see the difference ???? lol :tong:

http://i35.tinypic.com/w9f8qp.jpg

http://i35.tinypic.com/1zqvg3s.jpg

And this is how it going to fit in black and red on the Chiller :

http://i38.tinypic.com/rif8zb.jpg

http://i37.tinypic.com/op6wph.jpg

http://i45.tinypic.com/27y5ugj.jpg

MAt Black acryl bended with a heatgun, for detail for the Boreas chiller on the HDD bays.

http://i38.tinypic.com/zlzxty.jpg

now waiting to receive the mobo hopefully this week, or at last beginning next week.

Also a nice toy for OC, the Evga EVbot.

The motherboard (hopefully this week)

Mobo SR-2 link info

http://i34.tinypic.com/30hpjs9.png

Nice toy for OC on the mobo :

EVbot link info

http://i35.tinypic.com/2i0dkd2.jpg

http://i36.tinypic.com/2i29avo.jpg

Only problem is that the case needs a big adjustment for fitting the mobo in the case,

but it will work how i whant it.

i can also use a backplate likes this, but i will keep the original backplate of mobo, but adjust it :

http://i33.tinypic.com/24qs7xi.jpg

If you look at the sizes of the Classified ATX mobo (30.5 x 26.4cm) against a SR-2 E-ATX (34.6 x 38cm) :

http://i37.tinypic.com/25hzsk7.jpg

the case will need some adjustments lol.

http://i45.tinypic.com/27y5ugj.jpg

Mounting for the Boreas Chiller made, was first the HDD trays.

Now made mat black acryl with behind the mounting plates for the boreas chiller.

And still need to finish it nice off and put holes for the cables of the boreas :

http://i52.tinypic.com/2ec3zba.jpg

http://i51.tinypic.com/2ns5g2g.jpg

http://i56.tinypic.com/1z6ckmh.jpg

the koolanc controller has new connectors, now only small smd-led's in it for some red light and it is finished

http://i52.tinypic.com/ne84k6.jpg

now i have 1 koolanc flowsensor, atx power and the internal usb done :

http://i51.tinypic.com/10x982v.jpg

http://i55.tinypic.com/2rohoap.jpg

http://i55.tinypic.com/2rqim9f.jpg

http://i53.tinypic.com/154a6uq.jpg

i made already last night some modifications to the tray to fit the mobo,

but the case also needs some modification, and the box to close it over the mobo, needs to be bigger also.

i just can't get it closed completly, look at the pic good :

http://i54.tinypic.com/103spd3.jpg

http://i45.tinypic.com/27y5ugj.jpg

very small update, making little adjustments on the fan for a little more airflow.

this is how it looked after i changed the outside :

http://i35.tinypic.com/w9f8qp.jpg

a first little piece is changed, tomorrow will be more :

http://i53.tinypic.com/dqpzy1.jpg

and this is what we going to change :

http://i54.tinypic.com/2qipgef.jpg

Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again :

http://i54.tinypic.com/2q0u77r.jpg

http://i45.tinypic.com/27y5ugj.jpg

the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru :

http://i55.tinypic.com/106gep5.jpg

fan grill got it first paint job , is get dry now :

http://i55.tinypic.com/2ia3ddj.jpg

and the front plate for the drive bays has a primer :

http://i54.tinypic.com/2n8wu9y.jpg

and first paint job in mat black (just fresh, needs to dry) :

http://i55.tinypic.com/6zr2wi.jpg

front plate drive bays :

http://i55.tinypic.com/155i1ox.jpg

http://i53.tinypic.com/atqm3p.jpg

cpu are in ta house !!

even the same batch number batch, matched pair

http://i52.tinypic.com/2nsye.jpg

http://i56.tinypic.com/2627io2.jpg

http://i45.tinypic.com/27y5ugj.jpg

Little update,

Coolit Freezone Elite is ready to and cpu's are on the mobo ,

And here are some pics of the total view :

http://i55.tinypic.com/nccies.jpg

http://i53.tinypic.com/4hwh6o.jpg

http://i51.tinypic.com/2nq4k8y.jpg

http://i55.tinypic.com/24osj8l.jpg

http://i45.tinypic.com/27y5ugj.jpg

today i sleeved the cables for the Evga EVP OC Panel V3,

Also the flat ide cable etc

And made a cable to extend the Connector from the motherboard EVbot in the IO-Shield to the front of the pc :

enjoy the pics :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002.jpg

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001.jpg

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_003.jpg

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_008.jpg

Here you see the difference between the Classified ECP Panel, and the SR-2 ECP Panel V3 :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_009.jpg

Extending cable for the EVbot :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_004.jpg

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_005.jpg

Also did some cables of the coolit coolers and the Psu for it, the thermaltake Dual bay 650w psu :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001-1.jpg

Enough MDPC-X sleeving (few hondred meters) ?

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002-1.jpg

changing the connecting on my mobo in 90° angle :

http://i53.tinypic.com/712.jpg

http://i54.tinypic.com/x4os4.jpg

allmost finished, just have to make it nice :

http://i52.tinypic.com/6z5x80.jpg

http://i51.tinypic.com/b7maea.jpg

http://i55.tinypic.com/n34xe1.jpg

http://i55.tinypic.com/2q1urs4.jpg

http://i52.tinypic.com/sp90tx.jpg

Two koolance 360 rev1.1 , and koolance SR-2 Classified full cover block are arrived :

http://i54.tinypic.com/33ud4it.jpg

http://i54.tinypic.com/2ly64ap.jpg

after received it, let's open up the full cover block SR-2 and change it a little bit :

http://i53.tinypic.com/2gv6bye.jpg

a lot of sanding it to get the nickel of it, and then the first layer of primer :

http://i53.tinypic.com/21k9mr4.jpg

http://i56.tinypic.com/10idipw.jpg

http://i45.tinypic.com/27y5ugj.jpg

first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch,

after when it's dry mount the block again and put it on the motherboard :

http://i52.tinypic.com/6pymfn.jpg

http://i55.tinypic.com/zjzb4i.jpg

http://i54.tinypic.com/2ze9fee.jpg

SR-2 full cover block is ready and mounted :

http://i55.tinypic.com/dq5e1j.jpg

http://i54.tinypic.com/14dd72e.jpg

http://i52.tinypic.com/5xk01c.jpg

http://i55.tinypic.com/2d7ikpy.jpg

Now i'm again doing little sleeving, and this week making also the 90° angle for the cpu power connectors.

And making a new motherboard cover of the case, it needs to be bigger (bigger mobo then normal fit the case)

pics of what i did today :

from this :

http://i51.tinypic.com/2ntbxwl.jpg

i made these, and a little bit more, only waiting for a new shipment of red connectors :

http://i55.tinypic.com/20r8dxz.jpg

received package with connectors :

http://i55.tinypic.com/p883s.jpg

http://i52.tinypic.com/70ciz7.jpg

i made this, and have to make more of them for the other cpu and vga power on mobo :

http://i53.tinypic.com/w0osw5.jpg

http://i53.tinypic.com/2utjn1w.jpg

http://i51.tinypic.com/1xxjki.jpg

http://i53.tinypic.com/1zwytqb.jpg

http://i51.tinypic.com/2eur3vk.jpg

http://i55.tinypic.com/4uann6.jpg

and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir :

http://i51.tinypic.com/2a5hbvs.jpg

http://i52.tinypic.com/2u7lj88.jpg

http://i52.tinypic.com/2ry66va.jpg

http://i45.tinypic.com/27y5ugj.jpg

The other cpu his power cable is also done, and the PciE cable also :

http://i52.tinypic.com/11c48sp.jpg

http://i52.tinypic.com/211qye1.jpg

http://i51.tinypic.com/2nkub01.jpg

Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :

http://i56.tinypic.com/adyh61.jpg

http://i45.tinypic.com/27y5ugj.jpg

new parts in :

Evga SR-2 1200w (peakload 1700w) psu

Due to U.S. regulation, power draw over a typical household 110-volt AC line limits the PSU-1300ATX-12N to 1300W. However, the unit is fully capable of a continuous 1700 watts when powered from a 220V AC circuit. Users are responsible for supplying adequate AC power for the PSU-1300ATX-12N.

http://i55.tinypic.com/24phw0z.jpg

http://i54.tinypic.com/ayqzv4.jpg

PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores :

http://i53.tinypic.com/33d9jqe.jpg

Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores :

http://i56.tinypic.com/20j304i.jpg

and te best part of the power supply is on the back of it lol :

http://i54.tinypic.com/24edx74.jpg

also i got two red displays in for on my controller.

To swat the green light lcd out for a red symbol / black background display :

http://i55.tinypic.com/jtw040.jpg

http://i45.tinypic.com/27y5ugj.jpg

take a HB624 controller with ALMEGA88V chip :

http://i51.tinypic.com/5wyo38.jpg

put some cables and a pot meter on it :

http://i53.tinypic.com/ebehad.jpg

with the pot meter 10K i can adkust the screen light :

To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers :

http://i54.tinypic.com/24vk7so.jpg

http://i56.tinypic.com/r91zy9.jpg

cpu disable jumpers soldered for make the connector for it in front of the case :

http://i55.tinypic.com/2ytwqo8.jpg

need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : :

http://i54.tinypic.com/2igiueu.jpg

putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp

with a Koolanc TMS-200 controller :

http://i56.tinypic.com/1znxsog.jpg

http://i56.tinypic.com/r0ytcm.jpg

http://i53.tinypic.com/293ex6s.jpg

total overview of the mobo in current state:

http://i54.tinypic.com/10pc3th.jpg

today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller.

http://i52.tinypic.com/2eoihi0.jpg

but a lot of cables here that needs to be in the case fitted.

http://i51.tinypic.com/2898nkm.jpg

Alu plate of 1.5mm is in, tomorrow making the adjustment of the mobo cover :

http://i51.tinypic.com/m4qxj.jpg

http://i45.tinypic.com/27y5ugj.jpg

Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case.

Also adjusting some things to get the mobo cover enlargement fitted on case,

used a lot of dremel cutting disks :

http://i51.tinypic.com/34qpv2h.jpg

And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough :

http://i54.tinypic.com/2igiueu.jpg

And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo :

http://i54.tinypic.com/20p5v08.jpg

just bended the alu plate in the same curve as the standard mobo cover also have :

http://i53.tinypic.com/qx2xxz.jpg

The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo :

http://i54.tinypic.com/fxxjxi.jpg

So far, a beautiful build. Interesting choice of case for a custom build, really looking forward to seeing it come together.

I'm curious as to why you're going with GTX285s though.

Was going by the OC tool you've got plugged into the 285s:

http://i36.tinypic.com/2i29avo.jpg

it was just a pic for showing the EVbot.

I only use the EVbot for motherboard,

GPU's i clock them with Afterburner

http://i45.tinypic.com/27y5ugj.jpg

The original mobo cover has a serious cut-out for the adjustment,

and you see the four square holes for mounting the new alu plate :

http://i56.tinypic.com/wc0far.jpg

This is the bottom of the original mobo cover, is a serious cut-out on,

so Quad sli GTX480 still fitts :

http://i56.tinypic.com/2m5xdmv.jpg

The new alu plate working on :

http://i53.tinypic.com/28tuxl5.jpg

And here it's fitted on the case base plate :

http://i55.tinypic.com/wqzjag.jpg

Nice fit :

http://i52.tinypic.com/wbt9nm.jpg

And with the base plate of the big Boreas Chiller,

you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting,

also the Coolit Freezone V1 needs his place in this plate :

http://i51.tinypic.com/2e0mget.jpg

http://i51.tinypic.com/2j47uia.jpg

And here you see what also needs to be cutt-out in alu plate :

http://i54.tinypic.com/29m8xhz.jpg

also with very small iron files i have to make the honey roster on another place :

http://i56.tinypic.com/15d8f94.jpg

Update after some hours work :

the BP fittings are in place also the cutt-out for the ATX 24pin :

http://i54.tinypic.com/15i3oyv.jpg

BP fittings close-up :

http://i56.tinypic.com/ilkk69.jpg

The outcome of the atx24pin :

http://i53.tinypic.com/2mwaxs4.jpg

Inside of the ATX24pin :

http://i52.tinypic.com/11hsby9.jpg

http://i55.tinypic.com/2hncmbo.jpg

A Total overview with the motherboard and his power connectors installed for viewing cable routing :

http://i52.tinypic.com/2055rwj.jpg

CPU1 Close-up :

http://i55.tinypic.com/21l4zlx.jpg

CPU0 Close-up :

http://i51.tinypic.com/27zx8br.jpg

ATX 24pin close-up :

http://i55.tinypic.com/wkljdk.jpg

ATX 24pin Close-up while motherboard is plugged in :

http://i53.tinypic.com/23j4klx.jpg

Total View ATX24 pin :

http://i55.tinypic.com/24w7x5d.jpg

TOTAL overview mobo + atx connectors , alu plate :

http://i51.tinypic.com/m9sr5f.jpg

busy on fitting the Coolit Freezone V1 under the mobo cover :

http://i54.tinypic.com/izrczk.jpg

And making by hand the honey roster like the original was a never ending thing, and was not nice,

so i will make another solution as roster to protect the fan :

http://i56.tinypic.com/34pj9ya.jpg

Working on the case again al day, bend the alu plate, making some acryl ready,

the extra piece of hight is for the cpu power cables of the left cpu :

http://i53.tinypic.com/crbzn.jpg

With the cooler on his place :

http://i55.tinypic.com/zvx8n7.jpg

With the red acryl on his place also for the enlargement of the mobo cover :

http://i51.tinypic.com/2qtfg4x.jpg

And then as last also grey smoke like on the cpu cooler left en on the vga's, is for breading room :

http://i55.tinypic.com/4rxnyt.jpg

for today i quit, tomorrow is another day for fooling around with this case :

http://i54.tinypic.com/20gdz0o.jpg

here are some new pics, with a little modification on case, and did some fine work :

http://i51.tinypic.com/f3uias.jpg

http://i53.tinypic.com/344trbs.jpg

http://i55.tinypic.com/10rlqfa.jpg

http://i55.tinypic.com/ifdicz.jpg

http://i51.tinypic.com/vsm444.jpg

http://i54.tinypic.com/2uhbus4.jpg