Jump to content
Corsair Community

CL 3.2.5695 - 1 of 4 x CL Mini - down form 2


red-ray

Recommended Posts

I have just updated to CL 3.2.5695 and noted as below:

  1. Only 1 of my 4 x CLCC were reported when 3.2.5676 reported 2 :mad:.
  2. All the devices connected to the CLCC are reported as being on Channel 1 so clearly is incorrect :(:. Is this a known bug and when will it be fixed?
  3. The H80iGT does not report the Available LED Channel when the H110iGT does. Is this a known bug and when will it be fixed?
  4. When I first ran CL it changed my H80iGT LED from RED to WHITE :(:, but my H110iGT LED stayed RED. Is this a known bug and when will it be fixed?
  5. My AX1500i has 3 temperature sensors, but CL only detected and reported 1 of them :sigh!:.
  6. My RM PSU fan is no longer flashing RED :D:, though CL incorrectly reports that it has a temperature sensor when it should be the +12V Current.
  7. Why is the 1.2.11 cooling node firmware (CorsairLinkCoolingFW_1.2.11.s19.gz) not shipped with CL :confused:?
  8. I can only control my H80iGT Fans, Pump and LEDs using the inbuilt sensor, but can use any sensor with my H110iGT. When will this be addressed? See http://forum.corsair.com/forums/showthread.php?p=795538.
  9. CL correctly ignored my NZXT Kraken :biggrin:.
  10. All my hardware must be working as SIV reports and controls it all (limited H80iGT control) :cool:.
  11. Other issues are as before and none have been addressed. See http://forum.corsair.com/forums/showthread.php?p=790530 :sigh!:.
  12. A good feature from my perspective is that CL 3.2.5695 reported so little of my hardware it took less time to recreate the profile :laughcry:.

I realise my system is not typical :eek:, but given both HWiNFO and SIV can report it for CL not to is poor. I suspect this will never be addressed with CL3, but how much of it will CL4 report and when will it be released? My main questions are:

  1. Will it support one old Link Commander?
  2. What will be the upper limit of CLCCs supported?
  3. Will it support Cooling Nodes via a CLCC and how many?
  4. Will it support H80s and H100s via a CLCC and how many?
  5. Is there anything CL 3.2.5695 supports that CL4 will not?
  6. In general how many of each model of CL device will be supported?
  7. I know it has not been released, however the requirements specification should have answers to all of these questions.

The devices I have and which were all detected and reported by SIV are as below. You will also see the worker thread usage is only 28% so SIV could easily support more :bigeyes:.

 

attachment.php?attachmentid=22564&stc=1&d=1439454245attachment.php?attachmentid=22567&stc=1&d=1439458202

 

What CL 3.2.5695 detected:

 

attachment.php?attachmentid=22562&stc=1&d=1439454183

 

What CL 3.2.5695 reported:

 

attachment.php?attachmentid=22563&stc=1&d=1439454197

 

What SIV reported:

 

attachment.php?attachmentid=22566&stc=1&d=1439454520

attachment.php?attachmentid=22565&stc=1&d=1439454258

690272561_CL3.2.5695Devices.thumb.png.cf6272aa399c2ebdb8677525883826f2.png

404591363_CL3.2.5695System.thumb.png.39860d11a9af53bf6cdd6e3a719bb11c.png

437752895_CL3.2.5695LinkUpdate.thumb.png.a3df66d73407c649ae6e51e2daf4e17f.png

928226041_CL3.2.5695CoolingStatus.thumb.png.0c3459cb94a0addffb153c4df7dfd56b.png

896574164_CL3.2.5695SIVSummary.thumb.png.d4ef678d9065e2740d060745e400daa2.png

1578729568_CL3.2.5695LinkLimits.png.91469958a4c2e486be39731440eee95b.png

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...