The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Solid State Drives (SSD) > SSD Firmware Update

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 04-24-2014, 04:29 AM
Innokentij Innokentij is offline
Registered User
 
Join Date: Apr 2014
Posts: 4
POST ID # = 706972
Innokentij Reputation: 10
Default How do i check what firmware i had before i flashed?

My problem is this, SSD disk is Corsair Force GT 240GB, after i updated it to 5.05 it has been unstable. The SSD disconects from the system and just rebooting with reset switch dont help. Have to manually turn computer off and on with power switch. Now what i need help with is to find out what firmware i flashed from since that worked flawless for soon 2 years or something. I used Corsair SSD toolbox to flash.

Edit1: Also where can i find older firmwares? I tried looking on forum but they just show recent once from what i can see?
Edit2: I think i found it here http://forum.corsair.com/forums/showthread.php?t=117994 gonna see if i can downgrade to second newest and see if system will be more stable, not impressed by corsairs after the recent update and this has left me in mood to go for samsung drive next time tbh.
Edit3: It runs the fw update of the older fw,s but it dont actualy downgrade... If this is intended this ssd is going in the garbage.

Last edited by Innokentij; 04-24-2014 at 08:06 AM.
Reply With Quote


  #2  
Old 04-25-2014, 04:45 AM
Toasted Toasted is offline
Registered User
 
Join Date: Apr 2011
Posts: 19,344
POST ID # = 707126
Toasted Toasted Reputation: 108
Default

Quote:
After your update if you still have issues, we strongly recommend the following steps:

1. Complete clearing of the BIOS. This is a good idea after any firmware flash of any device.

2. Secure erase the SSD. For some users, cloning of the drive works, for others it does not. This may be dependent upon the cloning tool used.

3. A clean installation of the OS if you experience instability after a BIOS clearing and secure erase.

UPDATE YOUR BIOS. As always for users with issues, we recommend that you update your motherboard/notebook to the most recent BIOS before attempting to flash your firmware. This may or may not resolve your issue but it is an excellent first step. Quite a few boards/notebooks have been given SSD specific updates over the past few months.
Source: http://forum.corsair.com/forums/showthread.php?t=117994
Reply With Quote


  #3  
Old 04-25-2014, 05:41 AM
Innokentij Innokentij is offline
Registered User
 
Join Date: Apr 2014
Posts: 4
POST ID # = 707132
Innokentij Reputation: 10
Default

I saw that, the bios got nothing to do with it and already at newest version. Secure erase because of a fw upgrade is no go, lazy coding will only be rewarded with the ssd being replaced since i have to reinstall whole OS anyway then. Same with last, your post didnt help me at all, but ty for trying atleast.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.