The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Hydro X Custom Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 07-17-2019, 08:52 AM
Deathtech Deathtech is offline
Registered User
Deathtech's PC Specs
 
Join Date: Jun 2019
Posts: 12
POST ID # = 1011570
Deathtech Reputation: 10
Default Liquid Metal, The XC7, and Direct Die mounting.

Hello all. Still waiting on the two replacement commander pro's, and rockit cool just so happened to have a sale.

I was wondering if anyone here might have some insight as to whether or not liquid Metal would adversely affect the nickel played copper bottom.

This is also a shot in the dark (I sent an email to rockit cool as well) but in their instructions they have a couple of videos. One for an EK velocity/supremacy that shows how many washers / shims to use. They also have a Corsair aio video, which uses slightly more shimming.

Could anyone say how closely related to the XC7 (in terms of height) The EK WB's would be? Are they similar, or is the block more closely related to Corsair's aio in terms of clearance?

Any help would be appreciated.
Reply With Quote
  #2  
Old 07-17-2019, 12:54 PM
Waukeen Waukeen is offline
Banned
Waukeen's PC Specs
 
Join Date: Oct 2007
Posts: 263
POST ID # = 1011593
Waukeen Reputation: 16
Default

No it will not. As long as the LiquidMetal doesn't touch aluminium you're good. LM and Al react with each other and it does bad things to the Al. Nickle and Copper are safe.

On the subject of a direct die mount, make sure you get the standoff they make for this purpose and be very careful. Easy to crack the chip doing this.

Can't argue with the results though because a DD mounting just doesn't GAF about loads typically. Very good temps but definitely risky.
Reply With Quote
  #3  
Old 07-17-2019, 06:03 PM
Deathtech Deathtech is offline
Registered User
Deathtech's PC Specs
 
Join Date: Jun 2019
Posts: 12
POST ID # = 1011633
Deathtech Reputation: 10
Default

Yeah, the whole direct die kit with plate, delid tool and liquid Mercury (and a small carrying case) was just 49.99. specifically the i9 - 9900k / 9700k / 9600K delid tool 89.

The inclusion of the liquid Mercury and the little things sold me on it. Wouldn't do this if I didn't have every single necessary tool to be as safe as possible.

On a second note, a lot of people mention using clear nail polish or liquid electrical tape to cover the smt's on the chips bare pcb. I'm wondering if people leave this nail polish on / liquid tape on or take it off after the liquid Metal application. Seems everyone recommends using liquid electrical tape, but always winds up using clear nail polish.

Seems like it could cause some weird thermal patches? Maybe I'm overthinking it.

Last edited by Deathtech; 07-17-2019 at 06:06 PM.
Reply With Quote
  #4  
Old 08-09-2019, 02:38 AM
Zone55555 Zone55555 is offline
HydroX Success Story
Zone55555's PC Specs
 
Join Date: May 2010
Location: Ontario, Canada
Posts: 98
POST ID # = 1014162
Zone55555 Reputation: 10
Default

Late answer, but they leave it on.
Reply With Quote
Reply

Tags
direct die, liquid metal, metallurgy, waterblock, xc7

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.