DDR4 Part Numbers

[The Veterant]

Originally Posted by emissary42

CMK = Vengeance LPX
CMD = Dominator Platinum

That is pretty easy to see from the table in the opening post.

DS = Double sided modules, ICs on both sides, usually 16 total (probably also dual rank)
SS = Single sided modules, ICs on one side only, usually 8 total (probably also single rank)

Effective memory latency is a result of memory timings and clock rate. However this is probably not the right thread to go on about that topic ;)

Just head for the FAQ that is linked above and continue with the DDR4 whitepaper.

Thanks for your promptly answer and directions to where to get further information.

[jmccomas85]

Is there any way to purchase 16GB of Dominator Platinum DDR4 Memory in a 2x8GB configuration? I would really like to use it in a build with an ASrock x99E-ITX board, but I can't really justify buying a 32GB kit and only using half of it.

Thanks

[Technobeard]

Originally Posted by jmccomas85

Is there any way to purchase 16GB of Dominator Platinum DDR4 Memory in a 2x8GB configuration? I would really like to use it in a build with an ASrock x99E-ITX board, but I can't really justify buying a 32GB kit and only using half of it.

Thanks

Yes, it's on the list.

[djam]

Hi All,

Is there information on how to decode the part numbers ?

i.e. what is the 'B' in the following part number represent ?

CMD32GX4M4B3000C15

Regards

[Technobeard]

Originally Posted by djam

Hi All,

Is there information on how to decode the part numbers ?

i.e. what is the 'B' in the following part number represent ?

CMD32GX4M4B3000C15

Regards

Check out the product page for that module or the Memory Part Number Breakdown for more info.