jrwininger Posted March 16, 2020 Share Posted March 16, 2020 I'm thinking about placing the Bitspower Hexagon Flow Indicator into my loop. The reviews on Amazon seem mixed. Anyone have this installed? Link to comment Share on other sites More sharing options...
c-attack Posted March 16, 2020 Share Posted March 16, 2020 My lifetime experience has been mixed as well. It's a small mechanical part. It has the ability to make noise. There is a lot of self-loathing involved after draining, installing, refilling, and then it whirs like a cheap pinwheel. I almost put one in one of my systems last year. That build has black soft tubing, full cover CPU block, and the reservoir is in the back of the case out sight. A truly blind build. That is the one I bought. I decided not to install it. If you have clear tubes, a clear CPU block, or the clear reservoir is in sight in the case, you can pretty much tell when the fluid is moving. You can't base actual flow speed off the the perceived turn rate of the wheel, so I consider it a literal pinwheel for decoration. If you are interested in an actual flow meter that reports a signal to fan header or displays it, that may be something of more value if you like to make detailed analysis of your loop performance. Link to comment Share on other sites More sharing options...
cmdshft Posted March 20, 2020 Share Posted March 20, 2020 Tbh, you don't really need a flow meter anyway. If you have poor or no flow, your temps will tell you. Link to comment Share on other sites More sharing options...
Recommended Posts