Jump to content
Corsair Community

Cannot enter Bios...


zocker7

Recommended Posts

Hi...first sry for my bad english.... :)

so i have the RAPTOR K50 and all is fine BUT when i boot my pc and try to enter the bios nothing happens and the same when i can choose the booting operating system i cant type any commands i have to wait until the pc boots up into windows and then all is fine!

I have checked my bios and USB Legacy is enabled and my other usb keyboard works fine.... i hope there is a solution i dont want use two keyboards.....

Link to comment
Share on other sites

During bootup it can delay the BIOS/UEFI initialization depending if you have partial/full/no USB initialization during set up(a fastboot setting within some motherboards). When the BIOS hangs, try switching the switch on the top side of the keyboard and back to the original position, then wait a few seconds/minute. If nothing happens try unplugging the USB cord out of the computer and that should definitely work.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...