The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 10-25-2011, 09:35 PM
filbertnut filbertnut is offline
Registered User
filbertnut's PC Specs
 
Join Date: Oct 2011
Posts: 2
POST ID # = 537331
filbertnut Reputation: 10
Question H80 aftermarket fans?

Okay I just had a few questions.

1.) If I wanted to replace the fans on my H80 could I?

and

2.) Do I have to plug my replacement fans into the water block?
** EX.) The new fans do not have a 3pin connnection rather a 4pin molex and 2pin cable for a fan speed controller adapter. ie- Thermaltake AF0026

If I do have to use the connection in the water block a simple 4pin molex to 3pin would work right?

Thanks for your input.
Reply With Quote


  #2  
Old 10-26-2011, 12:01 AM
parsec's Avatar
parsec parsec is offline
Registered User
parsec's PC Specs
 
Join Date: Aug 2011
Location: USA
Posts: 1,456
POST ID # = 537355
parsec Reputation: 10
Default

You can use any 120mm fans in theory with your H80, but fans that are similar or better in performance would be the better choice. What would make a fan "better" is usually up to the user, depending on what factor they find most important, cooling performance or noise level, for example.

You are not required to connect fans to the H80's fan controller, but you'll need to work out your own fan speed control, if you need it.

I can't say what will happen using molex to three pin adapters with the H80 controller. First, some fans don't seem to function well with the controllers software, which is tuned for use with the Corsair fans. Next, when using those adapters, you may not have any fan speed feedback to the controller, although if that is necessary or makes a difference is unknown to me, I've never read a post about connecting fans to a H80 in that way.

If you connect fans to the H80 with the adapters, you'll need to experiment with the H80's speed settings and those other controllers to see how it works, I cannot predict how they will function.
Reply With Quote


  #3  
Old 10-26-2011, 05:27 PM
filbertnut filbertnut is offline
Registered User
filbertnut's PC Specs
 
Join Date: Oct 2011
Posts: 2
POST ID # = 537527
filbertnut Reputation: 10
Default

Thank you for your input!
Reply With Quote


  #4  
Old 11-01-2011, 12:35 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,269
POST ID # = 538574
RAM GUY Reputation: 10
Default

The fan controller is optimized for our fans so if you use other fans you will likely have to use the MB or another fan controller. But you can try it and see if it works okay. Just the fans you use cannot draw more than 2 amps each.
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote


Reply

Tags
aftermarket, cooling, custom, fan, h80

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.