The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 03-09-2018, 01:34 AM
Frattastic Frattastic is offline
Registered User
Frattastic's PC Specs
 
Join Date: Mar 2018
Posts: 1
POST ID # = 944031
Frattastic Reputation: 10
Unhappy Nothing connected to Corsair Commander Pro shows up in Corsair Link

Hello,

This is my first build and especially first time dealing with RGB hardware. I purchased the Corsair Commander Pro, 3 HD120 RGB Fans, and the Corsair Lighting Node Pro. Starting with the Corsair Commander Pro it is hooked into the USB1 header on my motherboard and the power is connected to a sata connection that is also powering a hard drive on the same cable (cable has multiple sata power connectors on it.) The Lighting Node LED Strips are all connected to each other ending at being connected to the LED1 header on the Commander Pro. The 3 fans are connected to ports 1-3 on the Commander Pro and the power for each are connected to the PUMP_FAN1, SYS_FAN3, and SYS_FAN4 ports on the motherboard. All the fans are spinning and the speed is controllable in Corsair Link. So to sum it all up i've got 3 fans, and 4 daisy chained LED strips connected to the commander pro (which is being detected in the software, just updated the firmware) but the LED strips aren't working at all and the RGB for the fans aren't working. Please help a first time builder! Thank you!
Reply With Quote


  #2  
Old 03-09-2018, 02:42 AM
DevBiker's Avatar
DevBiker DevBiker is offline
iCue βeta Team Green
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,259
POST ID # = 944033
DevBiker Reputation: 88
Default

Quote:
Originally Posted by Frattastic View Post
Hello,

This is my first build and especially first time dealing with RGB hardware. I purchased the Corsair Commander Pro, 3 HD120 RGB Fans, and the Corsair Lighting Node Pro. Starting with the Corsair Commander Pro it is hooked into the USB1 header on my motherboard and the power is connected to a sata connection that is also powering a hard drive on the same cable (cable has multiple sata power connectors on it.) The Lighting Node LED Strips are all connected to each other ending at being connected to the LED1 header on the Commander Pro. The 3 fans are connected to ports 1-3 on the Commander Pro and the power for each are connected to the PUMP_FAN1, SYS_FAN3, and SYS_FAN4 ports on the motherboard.
OK, you totally lost me here. Where on the CoPro are the fans connected? What on the fans is connected to the CoPro? Why are they connected to the motherboard at all if you have a CoPro?

Quote:
Originally Posted by Frattastic View Post
All the fans are spinning and the speed is controllable in Corsair Link. So to sum it all up i've got 3 fans, and 4 daisy chained LED strips connected to the commander pro (which is being detected in the software, just updated the firmware) but the LED strips aren't working at all and the RGB for the fans aren't working. Please help a first time builder! Thank you!
If the fans are connected to the motherboard, they aren't controllable in Link. Have you added the RGB devices (strips, fans) to Link? (Link doesn't autodetect them.) Take a look at the RGB FAQ that's linked in my signature; there's a ton of information in there and I think it'll help you out a bit.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote


Reply

Tags
commander pro, corsair commander pro, corsair link, hd120, lighting node pro

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.