Jump to content
Corsair Community

Corsair XMS match to specs


mbarrett

Recommended Posts

Current build request for server specs out ........Corsair XMS Extreme Memory Speed Series, Low Latency 184 Pin 1gb (512mb x 2) ECC registered DDR PC-3200LL-Qty-2 Installing on the Gigabyte 875P Chipset Motherboard for Intel Socket 478 CPU, Model "GA-8KNXP(Rev 2.0) The memory certification page suggests Corsair 1x TWINX1024-3200C2 for that motherboard, does this match the specifications the customer provided? MCB
Link to comment
Share on other sites

That chipset on the MOBO you listed will not support registered RAM. It will support unbuffered ECC RAM. The RAM you have listed is not what the customer requested as they asked for registered ECC RAM. You will need to buy a true server MOBO to use that RAM. However I would suggest assessing their needs before deciding. The reg+ECC RAM and a server MOBO will cost WAY more than the MOBO and PC3200C2 RAM. If they don't need a true 24/7 365 days a year, mission critical, absolutely no errors are tolerable server, then I see no need to build a server using reg+ECC RAM. And, it may be cheaper to buy a preconfigured server anyways. Mike.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...