michigreppi Posted January 8, 2020 Share Posted January 8, 2020 Hello everyone, i'm planning on building my first pc. I was thinking about getting the iCUE 220t case with a sapphire nitro+ rx 5700xt which is 306mm long. I've read the case's specification which say that the maximum lenght is 300 mm with a radiator. I wont be putting a radiator in my build, would this graphic card fit in the case? Link to comment Share on other sites More sharing options...
JonKrmr Posted January 9, 2020 Share Posted January 9, 2020 Yes It will fit if you don't put a radiator in the front of the case. Link to comment Share on other sites More sharing options...
michigreppi Posted January 9, 2020 Author Share Posted January 9, 2020 Even with the 3 preinstalled fans on? Do you know what is the exact measure of the maximum lenght of the gpu with the 3 front fans on? Link to comment Share on other sites More sharing options...
JonKrmr Posted January 9, 2020 Share Posted January 9, 2020 Yes, even with fans installed in the front. You stated your graphics card is 306mm long. Case spec says 300mm max with radiator in front of case. That is figuring a 25mm thick fan with 25-30mm thick radiator so 55-60mm total thickness for radiator\fan. So only fans in front of case should give you about 25mm clearance with your graphics card. Link to comment Share on other sites More sharing options...
UrMumGay Posted February 9, 2020 Share Posted February 9, 2020 Hi, michigreppi. Would like to know if you have built the pc yet and whether the nitro+ fits without a radiator but with the 3 fans installed cuz im looking to build the same pc as well and need some confirmation to relieve me of my concerns Link to comment Share on other sites More sharing options...
Recommended Posts