The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > iCUE Software

Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-05-2019, 04:06 AM
hatman5700 hatman5700 is offline
Registered User
hatman5700's PC Specs
Join Date: Dec 2019
Posts: 6
POST ID # = 1026347
hatman5700 Reputation: 10
Default Corsair Node Pro - Not showing in Link/iCue after 1 day.

Hi all - purchased 3 ML120 fans that came with the Corsair Node Pro & fan 6-splitter. Everything worked fine on the initial plug & play, but upon my first restart my Corsair Node Pro disappeared from the Corsair Link or Icue. A few restarts later within the same day (about 4 hours) - no lights.

I've tried about a billion things and seen this issue pervade across many threads [common issue it seems]. Like many others, I also own a Corsair H110i, and this works fine in both softwares (also have corsair vengeance ram and that is working fine as well - meaning color control and fan control etc.) I'm hoping someone can help walk me through the steps to rectify this issue, I'm willing to retry all/anything to get this working again.

Here's my setup:
  • Fans: all 3 fan's 4pin connectors plugged into SYS_FAN3, SYS_FAN4, SYS_FAN5_PUMP respectively (in the bottom right corner of mobo: z390 aorus)
  • Splitter: 3 fans RGB headers into the 6 way splitter. 1st, 2nd, 3rd slots. Sata power connected. 1 3pin connector from splitter to the Corsair Node Pro (lighting channel 1)
  • Corsair Node Pro: USB b cable plugged into node pro, other 9pin connector plugged into front of mobo usb connector. Sata power connected.

I will list a bunch of relevant facts below; as well as my info from USBDeview:
  • USBDeview finds Corsair Lighting Node Pro, but it is CONNECTED = NO, and GRAY LIT (also DISABLED = NO)
  • I have tried CMOS reset, and have ensured BIOS is set to default settings
  • Fast boot is off in win10; Quick boot is off in BIOS.
  • Have uninstalled/reinstalled both Corsair Link4 and iCue a bunch, in all permutations
  • Have tried switching the USB to the header where my Corsair h110i is; does not work (however my h110i works regardless of which usb header slot it is in... I only have 2 on this mobo).
  • Have tried to follow one video where the guy uses a paper clip to hit the reset button on the Corsair Node Pro
  • I can see the fans on Aorus Smartfan5 in the Bios, and can still manipulate the speed from there - haven't messed with settings too much from here - maybe an avenue for success?
  • I just ordered a regular USB -> USB b cable to try using an external USB instead of the mobo header; am currently unable to test this until I get the cable.

Bought 3 ML120 fans yesterday, worked for the first 2 hours in corsair link & icue until I did a restart, then I couldn't see my node pro in either software, and then on the next restart no more colors (my fans spin, but no colors).
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 05:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.