davo84 Posted July 2, 2020 Share Posted July 2, 2020 Hi there, I am assembling my first RGB build and I'm struggling to get everything working together. These are the key parts involved - Phantek P400A Digital - Asus Tuf Gaming z490 plus wifi - Corsair SP140 - Corsair LS100 - Corsair Vengeance RGB Pro - Corsair K55 keyboard Unfortunately I can't get iCUE to identify or control the fans or LED strips (keyboard and RAM works just fine, programmable etc..) I've done the following: - P400A fan headers to CHA_FAN1, CHA_FAN2, CHA_FAN3 - P400A M/B D-RGB pin to 5V addressable header on the board (2+1 pins so no chance to putting it the wrong way) - SP140 fan to CPU_OPT on MB - SP140 rgb to 12v header on MB (mb h,as 4 pins, but fan plug has 3 pins and I'm not sure about position or orientation) - LS100 totally unplugged as I have no idea where to plug it. I also download Armory Crate and Aura Sync from Asus, but to no avail. In the bios I set All On on the Aura options. Any help would be super appreciated Link to comment Share on other sites More sharing options...
davo84 Posted July 2, 2020 Author Share Posted July 2, 2020 (edited) Update: Phantek's Fan do work. Just needed the SATA power connection. So the question is, how to connect the LS100 (I realised I only bought the expansion kit) and the P140 so that they can be synced properly? Do I need a Corsair Fan Hub or a Lightning Node Core? Edited July 2, 2020 by davo84 Link to comment Share on other sites More sharing options...
Ch3vr0n Posted July 2, 2020 Share Posted July 2, 2020 Going by that last post, i'm assuming you're the same guy i responded to on reddit ;) You have your answer :p Link to comment Share on other sites More sharing options...
Recommended Posts