rob9616 Posted February 17, 2015 Share Posted February 17, 2015 I have a h80i cooling system set up, i can control the fans but most of the time, i go into corsair link and i get this http://gyazo.com/6c140ef1366e7eedcb8e1b6efff10944 the fans turn to 100% and the windows disconnect device noise plays. I can't control the fans when this happens and it usually lasts for about 20 seconds. Any help would be appreciated, thanks. Link to comment Share on other sites More sharing options...
snapper69 Posted February 17, 2015 Share Posted February 17, 2015 It sounds like Windows is losing your H80i USB signal. Can you try switching the computer off, connecting the USB plug to a different header and then rebooting? Link to comment Share on other sites More sharing options...
rob9616 Posted February 17, 2015 Author Share Posted February 17, 2015 I plugged the USB header into a different port. On bootup it said there was a CPU fan error and beeped. Apart from that the fans seem to be working properly Link to comment Share on other sites More sharing options...
snapper69 Posted February 17, 2015 Share Posted February 17, 2015 Have you checked the cable from the pump to the CPU_FAN header? Can you check the CPU fan reading from the Bios, that will tell you is the pump is working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.