cptfap Posted January 23, 2020 Share Posted January 23, 2020 Hello all :D:, Just have a question about the lighting Node pro: I have to connect 6 LL120 fans and 1 LL140 fan. Which means 2 Corsair RGB Fan Led Hubs *sigh*. The lighting Node pro has two channels: 1 | 2 - would I be correct in saying that I should connect the second RGB hub to this for power or would I have to use another light Node Pro hub? Second issue I am facing is that I need 3, preferably 4 internal USB 2.0 headers. What's the best way to achieve this? I feel that spending another €140 on 2 commander pro units is over the top. There is another brand that has 3 headers but read some bad reviews and its molex powered :sigh!: Link to comment Share on other sites More sharing options...
DevBiker Posted January 23, 2020 Share Posted January 23, 2020 1) There are RGB Fan Splitters available from a 3rd party. You could put all 7 LL fans on a single hub. But no more than 7!! 2) You can use one LNP with one hub on each channel. The LNP doesn't power the fan hub; it only provides the data signal. 3) Many folks use the NZXT internal USB hub. It works. It's molex so that's icky. Link to comment Share on other sites More sharing options...
Recommended Posts