sbl8607 Posted September 27, 2017 Share Posted September 27, 2017 When I turn Corsair Link on today, newer version alarm is come up. So, I updated Corsair Link and Commander Pro's firmware to 0.3.153. But Corsair Link doesn't show fan speed data correctly. My fans are ML120, and HD140. [ame] [/ame] Actually, fan RPM is vary and work properly, but Link shows nothing. Fan#1 and #2's RPM goes up by 3000+ RPM. And goes down to 0. So weired. Sometimes, If I shut the PC down and boot the pc up, so CLCP's all the temp disappear, and 6 fans down to 2. (Link showed both fans 0RPM) Can I downgrade CLCP's firmware? CLCP's new firmware seems unstable. I don't want use this firmware now. Link to comment Share on other sites More sharing options...
manumoto77 Posted September 27, 2017 Share Posted September 27, 2017 Hi , where i can find the old (0.2.136) Commander Pro Firmware? Flashed the New one today and now all Temps are stuck and one is missing,before the Link/Firmware update all was working without Problems!! Link to comment Share on other sites More sharing options...
red-ray Posted September 27, 2017 Share Posted September 27, 2017 where i can find the old (0.2.136) Commander Pro Firmware? No idea, but for me it's \\RED\F\Corsair\Firmware\ :bigeyes:CLCP + CLNP Firmware.zip Link to comment Share on other sites More sharing options...
manumoto77 Posted September 27, 2017 Share Posted September 27, 2017 No idea, but for me it's \\RED\F\Corsair\Firmware\ :bigeyes: Thanks... Yes i now (C:programmData/CLink4/Firmwareupdates) but i deinstall every time the old Clink when update to a new one,and then only 0.3.153 is there...:laughing: edit; thx its working again... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.