mingmong Posted February 22, 2012 Share Posted February 22, 2012 Heres a screen shot of the software at its best!! I had high hopes for this kit:confused: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 22, 2012 Corsair Employee Share Posted February 22, 2012 Chances are the Temps are not being detected and its reporting the max. I will forward this to the software Engineer and see what he suggests. But can you tell us the make and model of this HDD? Link to comment Share on other sites More sharing options...
SpDFrek Posted February 22, 2012 Share Posted February 22, 2012 That drive is an SSD correct? More than likely the SMART report for that drive is wrong. If it was the software, all three of your drives would report the same false reading from the SMART report for each drive. Link to comment Share on other sites More sharing options...
mingmong Posted February 22, 2012 Author Share Posted February 22, 2012 I have 2x corsair force 3 120 gb SSD C120G11510895 1 runs my operating system windows ultimate 64 bit english 1 i use soley as a games drive I have 1 x 250 gb HDD Hitatchi and 1x HDD Deskstar 500gb sata 2 is there any bios settings i need to adjust for the link to be able to read my mobo? I have a ASUS P8Z68 Deluxe/GEN 3 Cheers Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 22, 2012 Share Posted February 22, 2012 Which specific drive is being reported incorrectly? Which drives are being reported correctly? Are your Force 3 drives running seperately or running in a RAID-0 stripe? Link to comment Share on other sites More sharing options...
mingmong Posted February 22, 2012 Author Share Posted February 22, 2012 separately. ive just uninstalled and reinstalled the corsair software it now reading 30 30 28 a little better. thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.