The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Closed Thread
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 07-17-2017, 02:56 PM
Technobeard's Avatar
Technobeard Technobeard is offline
Bearded Corsair Employee
 
Join Date: Oct 2012
Posts: 4,285
POST ID # = 912117
Technobeard Reputation: 68
Default Discuss Link v4.8.0.82 here

This will be the official discussion thread for Link v4.8.0.82.

If you'd like to report a bug, please respond to this thread in this format:
  1. Version of your Link software. NOTE: If you're not using v4.8.0.82, please install it and see if the bug has been fixed.
  2. What version of Windows you're using.
  3. Summary - One line / sentence explaining the issue
  4. Detailed description of the issue - This part can be as long as you want. It should be detailed enough so that we can clearly identify the issue and attempt to replicate it.
  5. Attach photos of the issue to the post that help #4.

Quote:
07/17/2017 - Corsair Link Software Update Version v4.8.0.82

Changelog:
  • UI Update: Added "-" button to Commander PRO and Lighting Node PRO LED configuration screen for easily removing strips/fans.
  • Fixed high CPU and I/O usage reported on some systems.
  • Fixed UI scaling issue on 4K displays.
  • Fixed color effect synchronization between Link software and LED DRAM.
  • Fixed Vengeance RGB control on ASUS Strix Z270I Gaming.


  #2  
Old 07-17-2017, 03:04 PM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 912119
red-ray Reputation: 81
Arrow CLCP 0.2.136 + CLNP V0.4.94 Firmware Regression with Brightness Control

Using the CLCP + 0.2.136 firmware then I can't seem to control the port brightness when I only have 1 x HD RGB LED fan connected, but this seems to work fine on my CLNP with the 0.3.72 firmware.

The CLCPs worked as expected before I updated the firmware from 0.1.131 to 0.2.136 so I am sure there is a regression in the CLCP firmware.

Basically when I set 0% + 33% + 66% + 100% the brightness is as expected, but when I set 1% the LEDs are the same brightness as 100% with the CLCP, but the CLNP works as expected.

I have just updated my CLNP to the V0.4.94 firmware and this now also has this issue . I will address this in SIV 5.23 Beta-01 and later.

The CL 4.8.0.82 change log does not mention the updated CLCP firmware version and specify what has been changed. I did notice the Fan PWM clock has changed from 0.36 KHz to 17.9 KHz and wonder if this could be a factor in the brightness effect.

Quote:
The CLNP V0.4.94 firmware allows 96 rather than 72 LEDs to be controlled, but if you connect 256 LEDs then LEDs 96 to 255 are random colours when they used to be black/off.


Last edited by red-ray; 08-19-2017 at 07:30 AM. Reason: CLNP V0.4.94 also has the issue


  #3  
Old 07-17-2017, 03:19 PM
Landerx74 Landerx74 is offline
Registered User
 
Join Date: Feb 2016
Posts: 18
POST ID # = 912123
Landerx74 Reputation: 10
Default

Cant be downloaded. I get a server error when I try.


  #4  
Old 07-17-2017, 03:24 PM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,152
POST ID # = 912126
red-ray Reputation: 81
Confused Me too

Quote:
Originally Posted by Landerx74 View Post
Cant be downloaded. I get a server error when I try.
I get the same, but http://downloads.corsair.com/downloa...-v4.8.0.82.zip worked for me.


  #5  
Old 07-17-2017, 03:36 PM
Landerx74 Landerx74 is offline
Registered User
 
Join Date: Feb 2016
Posts: 18
POST ID # = 912128
Landerx74 Reputation: 10
Default

Quote:
Originally Posted by red-ray View Post

Thank you!


  #6  
Old 07-17-2017, 08:49 PM
SpeedyV SpeedyV is offline
Registered User
SpeedyV's PC Specs
 
Join Date: Jan 2017
Posts: 417
POST ID # = 912191
SpeedyV Reputation: 41
Default

Quote:
Originally Posted by red-ray View Post
Using the CLCP + 0.2.136 firmware then I can't seem to control the port brightness when I only have 1 x HD RGB LED fan connected, but this seems to work fine on my CLNP with the 0.3.72 firmware.

The CLCPs worked as expected before I updated the firmware from 0.1.131 to 0.2.136.

Basically when I set 0% + 33% + 66% + 100% the brightness is as expected, but when I set 1% the LEDs are the same brightness as 100% with the CLCP, but the CLNP works as expected.
I can confirm I am observing the same thing. Before updating my CLCP to firmware v0.2.136, I could set any Brightness value between 0% and 100% in 1% steps. Now, only 0%, 33%, 66%, and 100% work as expected. Other values yield different results, depending on how the LED strip is configured. For me,

In 1 x 72LED mode, they go to 100% for all other values.

In 6 x 12LED mode, they go to ~15% (a guess) for all other values.

In 3 x 24LED mode, they appear to go to 33% for all other values.


  #7  
Old 07-17-2017, 09:59 PM
justevanus justevanus is offline
Registered User
justevanus's PC Specs
 
Join Date: Jun 2017
Posts: 18
POST ID # = 912193
justevanus Reputation: 10
Default

here we go....

Corsair LINK 4.8
OS Windows 10 64bit
No Light effect option

Using Asrock B250 Gaming K4 with latest bios. throw in 4 DIMM's of Corsair vengeance RGB 2666.

Corsair link able to detect my DIMM's but not showing RGB Led option in it. please help solve the problem, even reinstall my system just for sure but still no RGB LED option for my DIMMS



  #8  
Old 07-18-2017, 06:54 AM
doudar doudar is offline
Registered User
doudar's PC Specs
 
Join Date: Jun 2016
Location: Egypt
Posts: 40
POST ID # = 912222
doudar Reputation: 10
Default

does this version prevent HDDs from spinning down "idle" like the previous or its fixed?


  #9  
Old 07-18-2017, 11:59 AM
den_jay den_jay is offline
Registered User
den_jay's PC Specs
 
Join Date: Jul 2017
Posts: 1
POST ID # = 912256
den_jay Reputation: 10
Default

Thank you for the latest version of corsair link.
My VENGEANCE® RGB 16GB (2 x 8GB) DDR4 DRAM 3200MHz C16 Memory Kit (CMR16GX4M2C3200C16) is finally working very well at my MSI B350 Ryzen mother board. 2 RAM RGB LEDs are working properly.

Last edited by Technobeard; 09-15-2017 at 06:49 PM.


  #10  
Old 07-19-2017, 08:41 AM
rennatho rennatho is offline
Registered User
rennatho's PC Specs
 
Join Date: Jul 2015
Posts: 5
POST ID # = 912390
rennatho Reputation: 10
Default

My corsair link v4.8.0.82
Windows 10 64bit
My corsair link is not controlling RGB, Fan, bomb.
Excuse me my engles and bad.


  #11  
Old 07-19-2017, 11:22 AM
Ingvarr100th Ingvarr100th is offline
Registered User
 
Join Date: Jul 2017
Posts: 31
POST ID # = 912404
Ingvarr100th Reputation: 10
Exclamation Drivers are not signed

Hi!

Corsair link v4.8.0.82
Win 10 x64 ver. 1703

It seems that H115i drivers are not signed.

Windows throws me 52 code in device manager. Running Win10 without driver signature checking temporary solves the problem.

EDIT
After downgrade to 4.7.0.77 everything is fine!


Last edited by Ingvarr100th; 08-16-2017 at 08:37 AM.


  #12  
Old 07-19-2017, 12:55 PM
CLAUDIOLDN CLAUDIOLDN is offline
Registered User
CLAUDIOLDN's PC Specs
 
Join Date: Jul 2017
Posts: 2
POST ID # = 912426
CLAUDIOLDN Reputation: 10
Default AX1200i + H100i not working

Hello everyone, I am posting this in hopes that anyone can help me through.

I have no problem with Corsair Link up to version 4.6.0.86 (In fact I am sticking with it right now as it is the last version that in which I don´t encounter any problem) but I missed out the previous update because of this problem and now I fear i am going to miss out this new update to, so it would be most productive to understand what is making this problem so I can update the software in the future.

I connect my PSU (AX1200i) to the Motherboard using the passing-through USB dongle on the CPU Cooler (H100i) and as stated in the post title, it is not working with the new version of the software.
Please notice, I don´t have any problem up to version 4.6.0.86 (including, after installing the update to version 4.8.0.82 and not detecting the PSU I just need to uninstall and re-install version 4.6.0.86 and it will immediately show up)

Thank you everyone, for your help in advance.

Cheers,


  #13  
Old 07-19-2017, 03:52 PM
SpeedyV SpeedyV is offline
Registered User
SpeedyV's PC Specs
 
Join Date: Jan 2017
Posts: 417
POST ID # = 912457
SpeedyV Reputation: 41
Default Auto Link Update?

I had Link 4.7.0.77 installed. I only use Link to install firmware updates to my Commander Pro (CLCP). Last night my CLCP locked up and I had to reset it and run Link to re-blow the 0.2.136 firmware to the CLCP. When I opened Link, it saw the CLCP and offered updates. I cancelled out and selected the link to ONLY update the CLCP. The next time I opened Link, it had updated to v4.8.0.82. I did not accept this update but it installed anyway.

Not a big deal for me as I don't use Link except for CLCP firmware updates, but was surprised to find that Link had updated to v4.8.0.82 - apparently without my permission.


  #14  
Old 07-19-2017, 04:49 PM
unilythe unilythe is offline
Registered User
unilythe's PC Specs
 
Join Date: Mar 2017
Posts: 28
POST ID # = 912468
unilythe Reputation: 22
Default

Legit gotta give props here, the CPU usage has been decreased significantly. Great job, that weas one of my biggest gripes.


  #15  
Old 07-20-2017, 01:14 AM
Landerx74 Landerx74 is offline
Registered User
 
Join Date: Feb 2016
Posts: 18
POST ID # = 912522
Landerx74 Reputation: 10
Default

Finally! This version of Corsair Link does not crash and show up in Windows reliability manager. In previous versions I would see errors every day and deffinetely every time I rebooted/restarted my system. So glad this has been fixed.


Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.