Sam-O Posted September 21, 2009 Share Posted September 21, 2009 Building a new computer with this DIMM set (6x2GB), want to make sure all is well before I add HDDs and an OS. Installed DIMMS on an Asus P6T with an i7 920. No problem with POST. Enter BIOS, it shows "Usable Size" as 12279 MB. Does that mean all six DIMMS are working and detected? Main AI Tweaker readout: AI Overclock Tuner - Auto CPU Ratio Setting - Auto Speedstep - Enabled Turbo Mode - Enabled DRAM Frequency - Auto UCLK Frequency - Auto QPI Link - Auto Voltages - all Auto OK? Under DRAM Timing Control, the "1st Information" is 8-8-8-20-4-59-8-6-20-0. Should I change the first four numbers to 9-9-9-24? Leave the rest alone? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 21, 2009 Corsair Employee Share Posted September 21, 2009 Just enable XMP should be all you need to set and yes it looks like all of the modules are detected. Link to comment Share on other sites More sharing options...
Sam-O Posted September 22, 2009 Author Share Posted September 22, 2009 Thought I read somewhere that XMP didn't work well with this MB/RAM combo. But I enabled it per your suggestion and: First four settings are now 9-9-9-24 Timing Mode is now 2N DRAM bus voltage is now 1.60v QPI/DRAM voltage is now 1.35v and it's at 1600Mhz All correct? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 22, 2009 Corsair Employee Share Posted September 22, 2009 Yes you should be good to go! Link to comment Share on other sites More sharing options...
Sam-O Posted September 23, 2009 Author Share Posted September 23, 2009 Sweet! Thanks. :biggrin: (Now if the after-market CPU cooler (on its way) doesn't interfere with the first DIMM slot, this will be a complete success!) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.