Gigitsu Posted December 10, 2015 Share Posted December 10, 2015 Hello, recently I decided to double the amount I have in my current box. I bought an additional six gigs of Corsair 1333 RAM, part number TR3X6G1333C9, same part number that I installed when I built the box in 2009. I installed it right along side the old stuff but the pc wont post. After some attempts I was able to boot the pc putting 2 sticks from the same kit in the channel A (no matter if is from new kit or the old kit, the only things that matter is that they are from the same kit). But once I boot the pc, only 4Gb of ram are recognized by the motherboard. CPU-z, instead, see all 6 sticks of ram and, with CPU-z, I've noticed that the timings are different. Looking more closely I've noticed that, while the part number are the same, my old ram are of version 2.3 but the new are v7.11. There are some breaking changes from version 2.3 to 7.11? I hope that is only a configuration matter, I've attached the output of CPU-z, screenshots of CPU-z memory and SPD tabs and photos (back and front) of two sticks of ram, the top one from the new kit and bottom one from the old kit.DESKTOP-3UNU176.txt Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.