Jump to content
Corsair Community

Anyone Answer This Question?


smile689

Recommended Posts

The Airflow's 3-pin RGB will not work with a JST-SM connector.

 

And the Strimer uses a JST-SM connnector, which you have going to the Airflow RGB.

 

A simpler solution would be 1 Lighting Channel Splitter and 1 Lighting Channel to JST adapter. One side of the splitter would go to the Airflow, the other side to the adapter.

 

If you do use some variation of the Asus style ARGB cable, make sure that you tape or heatshrink the connectors. They like to come loose. It's a lousy design and a problem that you don't have with the Corsair (Molex-SL) or JST-SM connectors as they have locking mechanisms.

Link to comment
Share on other sites

The Airflow's 3-pin RGB will not work with a JST-SM connector.

 

And the Strimer uses a JST-SM connnector, which you have going to the Airflow RGB.

 

A simpler solution would be 1 Lighting Channel Splitter and 1 Lighting Channel to JST adapter. One side of the splitter would go to the Airflow, the other side to the adapter.

 

If you do use some variation of the Asus style ARGB cable, make sure that you tape or heatshrink the connectors. They like to come loose. It's a lousy design and a problem that you don't have with the Corsair (Molex-SL) or JST-SM connectors as they have locking mechanisms.

 

 

 

attachment.php?attachmentid=36420&stc=1&d=1567013347

or

attachment.php?attachmentid=36421&stc=1&d=1567013823

 

it is right i understand?

1423.thumb.jpg.0e07109d144ab0e8229b3ddea40bea7f.jpg

1658156.thumb.jpg.274dbe81dd20c6a647531ea3cb9f517a.jpg

Edited by smile689
Link to comment
Share on other sites

×
×
  • Create New...