Zardoz2293 Posted December 20, 2015 Share Posted December 20, 2015 The following macro is linked to the M65 RGB sniper button. The sniper button is *not* pressed, yet other applications causing causing a privilege elevation event (UAC) triggers the macro as well as logging into Windows. Corsair Software and Hardware versions, firmware, boot loaders listed at bottom. Macro (Magnify, Zoom In Start): 0 Press key Gui 1 Press key Keypad_+ 2 Release key Keypad_+ 3 Pause execution for 150ms 4 Press key Keypad_+ 5 Release key Keypad_+ 6 Release key Gui --- Windows 10 Pro, 64-Bit CUE: v1.13.36 K95 RGB, FW=1.30, BL = 0.09 M65 RGB, FW = 1.19, BL = 0.23 --- Thank you Link to comment Share on other sites More sharing options...
Toasted Posted December 21, 2015 Share Posted December 21, 2015 Export the action to a .act file and upload it here. Actions > Right click the action > Export and upload it here so others can test it and see whether it will bring up the UAC prompt. Link to comment Share on other sites More sharing options...
Zardoz2293 Posted December 21, 2015 Author Share Posted December 21, 2015 and see whether it will bring up the UAC prompt. The macro does *not* invoke the UAC prompt, the UAC prompt (event) causes the CUE macro to be triggered (unexpected, and undesirable). In my case the macro "Zoom (Start & In)" is associated with the M65 RGB 'sniper' button. Macro file attached. Thank you for your valuable information regarding uploading the *.act file (including how to do it). Much appreciated.All actions.act Link to comment Share on other sites More sharing options...
Toasted Posted December 26, 2015 Share Posted December 26, 2015 Any chance you can provide a video of what is happening? I tried your actions and they seem to be working fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.