Neme_ Posted February 7, 2019 Share Posted February 7, 2019 Hello, I've just installed a set of three LL120's with the LED Hub and Lighting Node Pro. I've followed all instructions, pretty confident I've done everything correctly, but the fan LED's will not turn on whatsoever. I'm not sure if this is an issue with the fans themselves or CUE, but my H100i lighting has no problems with CUE. Any ideas what might be causing this? Thanks Link to comment Share on other sites More sharing options...
xMacias Posted February 7, 2019 Share Posted February 7, 2019 So RGB Hub needs to be plugged in with power as well. Have you gone into the Lighting Node Pro's Lighting setup to configure your lighting? Link to comment Share on other sites More sharing options...
Neme_ Posted February 8, 2019 Author Share Posted February 8, 2019 I've setup the node pro in cue like so. I remember plugging the hub in with sata power but will double check when i get the chance to. Link to comment Share on other sites More sharing options...
Neme_ Posted February 8, 2019 Author Share Posted February 8, 2019 So RGB Hub needs to be plugged in with power as well. Have you gone into the Lighting Node Pro's Lighting setup to configure your lighting? Node was plugged into SATA power. Moved it to a different one to see if it would make a difference but no luck. Link to comment Share on other sites More sharing options...
DevBiker Posted February 8, 2019 Share Posted February 8, 2019 Both the Lighting Node Pro and the Fan Hub need to be plugged in to SATA power. Are both plugged in? Link to comment Share on other sites More sharing options...
Neme_ Posted February 8, 2019 Author Share Posted February 8, 2019 Both the Lighting Node Pro and the Fan Hub need to be plugged in to SATA power. Are both plugged in? Yes, both are plugged in Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.