PaulAm87 Posted November 30, 2019 Share Posted November 30, 2019 Hi All, So i have recently upgraded my PC but kept my case, aio and fans but since then my SP fans have stopped working, i have read the forums and got a lot of tips of things to try but nothing seems to have worked for me so far and i'm a bit lost. So i have 2 ML 140's for the front of my case on my H115i aio - the fans PWM is attached to the connection on the H115i and the rgb connection is connected to the lightning node on ports 1 and 2 and attached to channel 1 on my commander pro. i then have 3 SP120's pwm connections go directly to the commander pro attached to ports 1,2 and 3 and the RGB connections connected to a second lighting node which is attached to channel 2 on the commander pro. the ML140's light up and and the SP120's don't, they have in the past but i can't see where the connections have changed during my upgrade. i have swapped the lighting nodes over changed the channel's and settings in Icue, i have tried different SATA power, unfortunately nothing has worked and my awful cable management feels like it has got worse. Has anyone got any suggestions on what else i could check? Link to comment Share on other sites More sharing options...
Zotty Posted November 30, 2019 Share Posted November 30, 2019 Hi buddy. I assume you mean RGB Fan LED Hubs rather than Lighting Nodes? i would have a good read of my FAQ and see if anything stands out.. http://forum.corsair.com/v3/showthread.php?t=173880 if you get no where then come back here and we will see what we can do.... Link to comment Share on other sites More sharing options...
PaulAm87 Posted November 30, 2019 Author Share Posted November 30, 2019 Thanks Zotty, Your right i meant the RGB Fan LED hub, i just couldn't get the name right in my head lol unfortunately not i have read through it and nothing has really stood out, i have created a diagram of my setup though. I have the one RGB Fan LED Hub on the same sata power lead as the H115i and the other RGB fan LED hub is on the same Sata power lead as the Commander pro. i have swapped the hubs about but no change, changed the cables that connect the hubs to the commander pro. changed the sata power lead combinations around and even had the hub that has the fans not lighting up on its own sata power lead but still i can't get the SP120's to light up. Link to comment Share on other sites More sharing options...
Zotty Posted December 1, 2019 Share Posted December 1, 2019 (edited) your diagram looks sound.. so.. the Working ML fans.... what happens if you disconnect them.. change that hubs iCUE settings to SP and then plug the sp's in,,, you know that hub works.. should the not fans light up it has to be the fans right?.. but do make sure you have unplugged the ML fans first prior to swopping the SP fans on to it.... Edited December 1, 2019 by Zotty Link to comment Share on other sites More sharing options...
PaulAm87 Posted December 1, 2019 Author Share Posted December 1, 2019 thanks, i have tried that and every time the SP's fail to light but the ML's are fine. i have even tried one SP fan connected to the RGB hub to see if i can get one to light up incase another had failed and go round the 3 i have but i get nothing. It's weird that all 3 have had there lights go at the same time but i think i have tried everything i can. Link to comment Share on other sites More sharing options...
Zotty Posted December 1, 2019 Share Posted December 1, 2019 Dont suppose you also have the SP button controller to try? Link to comment Share on other sites More sharing options...
PaulAm87 Posted December 2, 2019 Author Share Posted December 2, 2019 I do, somewhere. i will look it out, hook it up and report back! Link to comment Share on other sites More sharing options...
PaulAm87 Posted December 4, 2019 Author Share Posted December 4, 2019 so after a dig around i found the SP buttons, got them hooked up and nothing at all :S looks like the fans are the issue? Link to comment Share on other sites More sharing options...
Zotty Posted December 4, 2019 Share Posted December 4, 2019 could be... you know the RGB Fan LED hub works... you know the Data signal is getting through (when you tried the ML fans),, gotta be the fans.. strange for all 3 to be stuffed though Link to comment Share on other sites More sharing options...
PaulAm87 Posted December 4, 2019 Author Share Posted December 4, 2019 It is, I looked for damage on the cable incase on was damaged but everything looks perfectly fine. Oh well will just need to save up for some 120 ML fans ... maybe get a bigger case too the meshify c I have was meant for a lot if the cabling lol Link to comment Share on other sites More sharing options...
Recommended Posts