jmike Posted May 15, 2020 Share Posted May 15, 2020 (edited) Going through and reorganizing some loose PC parts and have a few modular PSU cables that are unmarked. I’m 90% sure these go to my HX750 but the issue is every cable with that PSU is marked “TXM/HX/AXi only”on the PSU end connector however these are blank. The only modular PSUs I’ve owned are: * Tagan BZ(does not match its connector style) * Corsair * EVGA (does not match their cable style) I have worked on and built PCs for folks who’s modular PSU wasn’t a Corsair, though I can’t imagine not leaving unused cables in their box. Also though the cables I’m questioning have similar cable training as the Molex and PCI-E cables that are marked HX. My luck would be if I just assumed, these would bite me if I ever need to use that PSU though these cables I’m questioning have very similar cable training bends to the rest of the HX ‘s. Edited May 15, 2020 by jmike Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted May 16, 2020 Corsair Employee Share Posted May 16, 2020 Corsair PSU's have had marked cables ever since Type 3 came out (originally labeled as "TXM/HX/AXi Only") Odds are these are for something else. But if you have a DMM, you can plug it in and make sure the correct voltages are on the correct pins and that will tell you where the cables came from. Link to comment Share on other sites More sharing options...
Recommended Posts