jordan4440 Posted May 10, 2020 Share Posted May 10, 2020 Hi guys,so i've looked far and wide for any information on the die type/Memory type for my Ramsticks,i have tried program after program but alas none seem to know who the manufacturer of my memory type is, i need it for DRAM Calculator as i want to do a little bit of ram overclocking,if anyone could spread any light on what manufacturer i have,i'd be more than grateful Module Number: CMK16gx4m2a2400c16 VENGEANCE® LPX 16GB (2 x 8GB) DDR4 DRAM 2400MHz C16 Memory Kit - Black Link to comment Share on other sites More sharing options...
emissary42 Posted May 10, 2020 Share Posted May 10, 2020 What version are the modules? You can just you post a picture of the label on the modules, if you don't know what I am talking about. Link to comment Share on other sites More sharing options...
jordan4440 Posted May 10, 2020 Author Share Posted May 10, 2020 What version are the modules? You can just you post a picture of the label on the modules, if you don't know what I am talking about. Thanks for the reply, version is 8.30 Link to comment Share on other sites More sharing options...
emissary42 Posted May 10, 2020 Share Posted May 10, 2020 Then the IC type of your kit is Nanya 8Gbit A-Die. Link to comment Share on other sites More sharing options...
jordan4440 Posted May 10, 2020 Author Share Posted May 10, 2020 Then the IC type of your kit is Nanya 8Gbit A-Die. Ofcourse the DRAM calculator doesnt have that specific memory type,no biggy,thanks Link to comment Share on other sites More sharing options...
emissary42 Posted May 10, 2020 Share Posted May 10, 2020 Apart from the most common IC Types the "calculator" is not that usefull anyways. Just manually overclock them instead. There are a couple of good guides out there, if you are new to that. Here is one of them: https://github.com/integralfx/MemTestHelper/blob/master/DDR4%20OC%20Guide.md Link to comment Share on other sites More sharing options...
Recommended Posts