Jump to content
Corsair Community

overclocked CMW32GX4M2C3200C16 (ver 4.32)


Recommended Posts

Since this is an overclocking forum...

 

My Corsair CMW32GX4M2C3200C16 (ver 4.32, dual rank, 2 sticks, 32GB)

overclocked to a stable DDR4-3600 maybe yours can to? If so let us know!

 

Settings are linked here in this thread (page 2)...

https://forum.corsair.com/v3/showthread.php?t=187175

 

AIDA64 Results:

Read: 51,740

Write: 28,731

Copy: 51,431

Timing: 71ns

 

Also I was able to overclock Zen2 infinity fabric to 1900MHz while RAM overclocked at DDR4-3600 that provided an approx +1500 bump in write performance but with additional ~6ns increase in latency and minor decrease in read performance approx -300.

Link to comment
Share on other sites

  • 1 month later...

I also have ver 4.32 but it's the lpx vengeance set. I was able to run it at 3200mhz with setting 15-18-17-36 (1.36v). It's really hard to Overclock, it won't boot with any timing lower lol. I don't know if I should keep this kit or buy un-opened box b-die (4.31) ram of kijiji. Mind you I'm afraid if I get defective ram as second owner, I will have no warranty backup. See my ram benchmark here:D::

https://prnt.sc/p9f704

Link to comment
Share on other sites

Since this is an overclocking forum...

 

My Corsair CMW32GX4M2C3200C16 (ver 4.32, dual rank, 2 sticks, 32GB)

overclocked to a stable DDR4-3600 maybe yours can to? If so let us know!

 

Settings are linked here in this thread (page 2)...

https://forum.corsair.com/v3/showthread.php?t=187175

 

AIDA64 Results:

Read: 51,740

Write: 28,731

Copy: 51,431

Timing: 71ns

 

Also I was able to overclock Zen2 infinity fabric to 1900MHz while RAM overclocked at DDR4-3600 that provided an approx +1500 bump in write performance but with additional ~6ns increase in latency and minor decrease in read performance approx -300.

 

Sadly after I updated my BIOS/UEFI I lost this wonderful DDR4-3600 overclock.

Link to comment
Share on other sites

I also have ver 4.32 but it's the lpx vengeance set. I was able to run it at 3200mhz with setting 15-18-17-36 (1.36v). It's really hard to Overclock, it won't boot with any timing lower lol. I don't know if I should keep this kit or buy un-opened box b-die (4.31) ram of kijiji. Mind you I'm afraid if I get defective ram as second owner, I will have no warranty backup. See my ram benchmark here:D::

https://prnt.sc/p9f704

 

With my set I was able to OC to DDR4-3800@1.38v w/ SOC@1.1v and pass memtest86 but windows would crash on boot. I haven't quite figured out how to stabilize it yet at this speed (may not be possible).

Link to comment
Share on other sites

×
×
  • Create New...