eternal8snow Posted January 22, 2020 Share Posted January 22, 2020 Hello guys, I need some help with this Ever since the most recent software update on the Lightning Node Pro, all six of my LL120 fans, just suddenly began to flicker/flash. I've always had my lighting effects running on Rainbow Spiral mode and sharp flashes of these colourful lights just all of a sudden began shooting into my eyes and I have no choice but to switch around to other modes. I think the issue happen whenever the colours change to Green/Blue and maybe Red but when I click [update] on the Settings tab and the software reinstalls, all the lights are fine (for the short period during the installation) and it goes back to the issue again. I have the fans set to a white now and I suspect it is a software problem. Can anyone help me resolve this? Thanks in advance Link to comment Share on other sites More sharing options...
xMacias Posted January 22, 2020 Share Posted January 22, 2020 Have you tried going back to the previous version of iCUE and seeing if that works for you? Link to comment Share on other sites More sharing options...
eternal8snow Posted January 23, 2020 Author Share Posted January 23, 2020 Have you tried going back to the previous version of iCUE and seeing if that works for you? I thought of it, but I don't know where I can find previous versions of the software on the Corsair site. Am I supposed to look outside of the official site?:bigeyes: Link to comment Share on other sites More sharing options...
eternal8snow Posted January 23, 2020 Author Share Posted January 23, 2020 Have you tried going back to the previous version of iCUE and seeing if that works for you? Tried it, didn't work. Maybe it'll work if I can back-date a few versions of my Lightning Node PRO's firmware? Link to comment Share on other sites More sharing options...
xxrobxx125 Posted February 12, 2020 Share Posted February 12, 2020 i have the same issue! any way to fix this??? this is soo annoying.. was working completely fine for like 5 months and all of the sudden they flicker.... Link to comment Share on other sites More sharing options...
usna92 Posted February 13, 2020 Share Posted February 13, 2020 If you change your lighting via instant lighting in iCue to a color other than white does it still happen? -usna92 Link to comment Share on other sites More sharing options...
eternal8snow Posted May 26, 2020 Author Share Posted May 26, 2020 Hey guys, I'd like to follow-up on this issue again. It's been months after I first wrote about this issue and since then I managed to open up the case and check the nodes and I think it may really be something wrong with it. When it comes to instant lighting, I have "color-changing" issues when I set the colors to: - Blue (any shades) - Green (any shades) What I mean by this is that while the lights does change to the desired colors, they do not stay consistent and they change to a different shade of Blue/Green to appear lighter, which then goes back to the correct color then jumps back and forth non-stop. Any help is appreciated. Link to comment Share on other sites More sharing options...
Danielw597 Posted May 26, 2020 Share Posted May 26, 2020 Hey guys, I'd like to follow-up on this issue again. It's been months after I first wrote about this issue and since then I managed to open up the case and check the nodes and I think it may really be something wrong with it. When it comes to instant lighting, I have "color-changing" issues when I set the colors to: - Blue (any shades) - Green (any shades) What I mean by this is that while the lights does change to the desired colors, they do not stay consistent and they change to a different shade of Blue/Green to appear lighter, which then goes back to the correct color then jumps back and forth non-stop. Any help is appreciated. I am experiencing flickering lights and instant lighting doesn't goto the colour I set, for me it's a faulty RGB Hub which I've currently got an RMA in process and waiting for a replacement to arrive tomorrow. If it's anything like mine then it'll be the hub that's the issue, but that's not ruling out the fans faulting. I diagnosed it by unplugging the fans from the hub and testing each one individually in port 1. Here's a vid of what mine looks like when using any profile. https://imgur.com/a/T0ejt6O Link to comment Share on other sites More sharing options...
eternal8snow Posted May 27, 2020 Author Share Posted May 27, 2020 I am experiencing flickering lights and instant lighting doesn't goto the colour I set, for me it's a faulty RGB Hub which I've currently got an RMA in process and waiting for a replacement to arrive tomorrow. If it's anything like mine then it'll be the hub that's the issue, but that's not ruling out the fans faulting. I diagnosed it by unplugging the fans from the hub and testing each one individually in port 1. Here's a vid of what mine looks like when using any profile. https://imgur.com/a/T0ejt6O Hey, thanks for pointing out the direction for me. :biggrin: The video does show your fan behaving the same way that mine is doing but strangely only that one fan of yours is flickering (unlike mine, which is all 5). I bought these fans for 2 years already, do you think there's a chance that I could replace the hub by contacting Corsair? Link to comment Share on other sites More sharing options...
Recommended Posts