SPL Tech Posted October 7, 2020 Share Posted October 7, 2020 I have an AX860 and I was thinking of getting the I version, but I noticed the I version does not have a hybrid switch on the back like the AX860 does. I set Icue to allow demo PSUs to see what I could control and it looks like the lowest I can set the fan curve to is 40%. I want the fan to be completely off when the PSU is at idle. Is this possible with the 860i? Link to comment Share on other sites More sharing options...
Zotty Posted October 7, 2020 Share Posted October 7, 2020 Hi buddy... When in its default mode. it would be zero RPM until the load is high enough to need the fan. this is its 'Silent Operation' Mode as for custom fan curves,, unfortunately no you cant set it any lower than 40% Link to comment Share on other sites More sharing options...
Pocah Posted October 8, 2020 Share Posted October 8, 2020 Hi buddy... When in its default mode. it would be zero RPM until the load is high enough to need the fan. this is its 'Silent Operation' Mode as for custom fan curves,, unfortunately no you cant set it any lower than 40% Something that I mentioned oh a long time ago that Corsair should rectify. What it needs is just to allow it to be off below a certain temperature then force it to be at least 40% above that temperatures. Link to comment Share on other sites More sharing options...
Recommended Posts