haspergm Posted December 12, 2019 Share Posted December 12, 2019 Hi there! is there any way to replace the liquid of my H115i? Link to comment Share on other sites More sharing options...
c-attack Posted December 12, 2019 Share Posted December 12, 2019 Not officially and I strongly caution against trying unless you are willing to sacrifice the cooler in the name of the experiment. A lot of screws for the cold plate don't really want to come out and weren't designed to. There is no fill port and no easy way to bleed air out of the loop. Even if you are experienced, it's about 50/50 it ends badly. So what's going on with the cooler? Link to comment Share on other sites More sharing options...
haspergm Posted December 13, 2019 Author Share Posted December 13, 2019 On the way of screwing then fangs, mistakes were made, and basicly drilled a hole. and liquid scaped. Does this mean that the AIO ir dead ? Link to comment Share on other sites More sharing options...
c-attack Posted December 13, 2019 Share Posted December 13, 2019 I would strongly advise you not use it. Repairing the radiator puncture would be problematic. Delicate area and you would always be wondering if it’s going to leak. Sorry. I guess if it’s a lost cause, you could try topping it off with water and then external testing, but this is a lot of work for something I would have a hard time trusting. Link to comment Share on other sites More sharing options...
haspergm Posted December 13, 2019 Author Share Posted December 13, 2019 Aight thaks for the advice :biggrin::biggrin: Link to comment Share on other sites More sharing options...
Recommended Posts