tim92655 Posted July 24, 2009 Share Posted July 24, 2009 i use to have a whea logger error event id 21 thot it was the motherboard but after replaceing it 4 times they told me it was the cpu. so i replaced the cpu and the whea logger's are gone. but i still can't get my system to run stable at 1066. i checked the memory with memtest86 v 2.11 with the memory set to 800mhz and 3 passes with no error's then i set the memory to 1066mhz 5,5,5,15 2.1volts and sli set to optimal and i get 21000 error's in memtest but no error's at 800mhz 5,5,5,18 is something rong with the memory? plus if i have the sli set to disable at 1066 the system will crash Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 5, 2009 Corsair Employee Share Posted August 5, 2009 Have you tried testing the Modules one at a time at DDR1066? And have you tried setting the memory frequency at DDR800 and then over clocking the CPU to get the speed up? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.