attractionimag Posted October 18, 2019 Share Posted October 18, 2019 I'm not sure I'm doing it right :) When I click on the icue profiles of silent, Balenced and performance, literally nothing happens The fans and pump show a value but the value doesn't move up or down and the sound of the fans doesn't change at all suggesting that nothing is changing, please help :) Link to comment Share on other sites More sharing options...
invictius Posted October 18, 2019 Share Posted October 18, 2019 i usually just click a profile quite, performance etc, then click the fans or pump you wanna change, then it slows or goes faster. try clicking em twice :p Link to comment Share on other sites More sharing options...
attractionimag Posted October 18, 2019 Author Share Posted October 18, 2019 I don't see any fans to click on? I have several in my case connected to my motherboard, as we with 2 radiator ones, I also upgraded the radiator ones to the pro ml140' too https://ibb.co/4RWSFzd Link to comment Share on other sites More sharing options...
invictius Posted October 18, 2019 Share Posted October 18, 2019 https://ibb.co/V2vSn2H Thats mine, i just click one of the profiles on the left, then click the fan1 fan2 etc to change the speed. Link to comment Share on other sites More sharing options...
attractionimag Posted October 18, 2019 Author Share Posted October 18, 2019 I don't see any fans Link to comment Share on other sites More sharing options...
attractionimag Posted October 18, 2019 Author Share Posted October 18, 2019 Do I need to do something in bios? Link to comment Share on other sites More sharing options...
c-attack Posted October 19, 2019 Share Posted October 19, 2019 It is most likely you are not applying the fan curve to the fan. Click on the preset or custom curve on the left. It will turn yellow. Then click all the fan(s) on the right you want to run that profile. They will “ring” yellow. In your instance there is one fan and the pump, although their behavior is different for each of those profiles. The pump is fixed speed, either High (Extreme) or Low (Quiet). The fans behave differently on those same presets. Each is a programmed fan curve of speed vs coolant temperature (H100i v2 Temp). However, at lower coolant temps the curve points overlap. You may not see a lot of speed difference at coolant temps in the low 20s. If you want verify you really have control, hit the + button in the Performance tab to create a custom “cooling mode”. This will also provide fixed RPM and % tools so you can manually change fan speed. There are also three shape tools in the upper right corner that correspond to the three presets so you can see their data points. Link to comment Share on other sites More sharing options...
Recommended Posts