FORCE LS 120GB Fail Update Firmware

[blessed9]

hello to all your friends , I have this ssd FORCE LS SERIES 120GB and tried to do update the firmware, on the process I pulled fail update and since then they see neither the windows nor through life , there to solve this problem ; Thank you very much
(I forgot to mention that when I plug the usb drive with my start to configure devices as " SATAFRIM " S9 USB DEVICE)

[Toasted]

Plug the drive directly into the motherboard. Does the BIOS correctly detect the drive?

If it doesn't, Chances of the SSD toolbox detecting the SSD correctly and updating it will probably be low.

It will be best to put in a RMA with a picture of your receipt as proof of purchase for a replacement.
https://corsair.secure.force.com/

[blessed9]

thanks for the answer, the bios sees him when pao click boot and sees him as SATAFIRM S9. I would avoid if dyntaon replacement because the process is lengthy , but I do not know if there is to solve this problem

[Toasted]

If your retailers's replacement process takes a while. You may want to consider replacing it via Corsair. The time it takes for the replacement process usually depends on the delivery time it takes for your SSD to reach Corsair.

[blessed9]

Thanks for the reply , that there is no way to build ; My only option is to replace ;