M65 RGB Double click bug

[JEFFsoBOMB]

Bump -- has anyone found a solution to this? I am also considering making an RMA, since my problems are similar to those listed above. I also have a problem where lifting the mouse registers as a "middle click" response, or whatever is assigned to the scroll wheel button.

[Phantium]

Seem to be having this annoying issue too, thought it was just me at first...
Then found this thread.

Any information on how to fix this? It's really driving me insane!!

[Yenraf]

Originally Posted by Yenraf

My M65 RGB just started doing this as well after about 3 weeks of having it. I tried several different things from reinstalling/reflashing to trying different USB ports....to no avail.

What seemed to make the issue stop for me was to very firmly mash the left mouse button. After about 10 or so firm taps on it....I have not had the issue since. It looks like its more than likely a faulty switch? Gonna see how long it continues to work before putting in an RMA.

UPDATE: Mine is still working great with not a single double click since mashing the left click button.

[Phantium]

Originally Posted by Yenraf

UPDATE: Mine is still working great with not a single double click since mashing the left click button.

I just tried your suggestion as well and it seems to reduce the double click issue.
Will report back if it occurs again.

[JeffRakes]

Originally Posted by Corsair James

Freaxy, make a RMA here and let me know your ticket number. I'll take care of it for you as I'd like to get the mouse back. If anyone else has this issue too, feel free to do the same. You can also PM me.

Same issue with new M65 RGB. The left button double clicks and the scroll wheel initially responds in opposite direction before correcting itself. I sent PM to Corsair James with RMA number.
CUE 1.2.77
Firmware 1.16

[ncc386]

I bought the RGB Sabre mouse a few weeks ago and it is now randomly double-clicking, as well.

[JEFFsoBOMB]

Welp, I sent in my RMA. The mouse is still double-clicking and is also inputting the scroll wheel command when I lift it up and place it back down. I suggest anyone having this problem to do the same; it seems like a common issue.

[jonathanporta]

I have been having this issue on my M65 since about three days after purchasing it. I tried all of the recommendations in this thread and finally opened a ticket for an RMA.

[Phantium]

I still seem to have the issue as well, it seems that also the thumb buttons sometimes double click.

[Toasted]

PM Corsair James if you are experiencing the double click issue on the M65 RGB mouse.

http://forum.corsair.com/v3/private....newpm&u=122767

[Dirtman73]

The double-click issue started with my M65 RGB three days after I bought it. This is day five, and now the left mouse button will only work correctly if I hold it down firmly and then release it. If I release the button too soon, it tries to "multi-click" and open whatever the pointer is hovering over several times.

The way the left button feels when I depress it leads me to think this is a hardware issue, and given the number of complaints I've seen about it, I'm just gonna go ahead and take my M65 back and get a refund.

If QA is going to be such an issue for this series of Corsair hardware, I'm starting to think I got lucky in holding off on purchasing that shiny K70. Very disappointing guys.

FLASH EDIT: now the left button is completely jinxed, it simply tries to highlight or select anything the pointer is tracing over no matter what kind of pressure I put on it with my finger. Yeah, this mouse is a piece of junk.

[terabyte]

Have you tried contacting Corsair James for the new beta firmware that is supposed to fix the double-click?

[Dirtman73]

Originally Posted by terabyte

Have you tried contacting Corsair James for the new beta firmware that is supposed to fix the double-click?

I got an automatic firmware update this morning, and it seems to have fixed the problem. I'm still leery of keeping this mouse, though - the fact that it worked as intended for three days and then clunked out worries me, firmware issue or not.

[Corsair James]

Hi all, FW 1.19 is now public and resolves the double click issue. If you have the older FW from me, go ahead and proceed with updating it to 1.19 through CUE.

http://forum.corsair.com/v3/showpost...75&postcount=1

[Calinono]

Hm, I find this weird, my mouse was perfectly fine since I got it in December, since I got the update yesterday I now have the double clicking problem when I did not have it before updating the software.
:(