Infernoken Posted November 15, 2018 Share Posted November 15, 2018 Hi, I installed my new PC with 3x120ML RGB & 3x140ML RGB fans and was happily driving these through my motherboard, no issues, noise,... I just wanted more control over my fan curves and rgb lighting into a single tool, so I ordered tha Corsair Commander Pro for ultimate control...! So I installed the 3x120ML RGB & 3x140ML RGB on all 6 ports of the Commander Pro (No splitters used!) and the fan on PORT 1 exhibited a strange buzzing sound? I checked the settings and all fans were on 4-pins mode, so no issues there? I also forced a FW update (same version) on the Commander Pro which seems to have helped a bit, but the noise is still there at lower rpms... Then I switched back to put all fans back on the motherboard, and now all is silky smooth again and no strange noise emission from the fans whatsoever??? So my Commander Pro is faulty? Is this a know issue? Please help... Link to comment Share on other sites More sharing options...
DevBiker Posted November 15, 2018 Share Posted November 15, 2018 Hmmm .. quite odd. I have a Commander Pro filled with ML fans as well and don't see that issue - and a splitter or two is involved as well. What are your voltage readings on the CoPro? You should be able to see this on the main screen. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.