Xii-Nyth Posted December 14, 2019 Share Posted December 14, 2019 Hi1 After updating iCue to the latest version the esc key also acts as the volume mute on/off. I've tried going to apps and feature > icue > modify > repair and re installing the strafe rgb's firmware. As a temporary fix I added to my profiles a remap key esc to volume up and to retain the original key output, so the volume mutes and unmutes immediately and esc still works as usual. Any idea how to permanently fix this? Note: this only occurs with icue open. Link to comment Share on other sites More sharing options...
baymaxeu Posted December 23, 2019 Share Posted December 23, 2019 I just had this same issue. You will want to do a clean install of the latest version of iCUE. Link to comment Share on other sites More sharing options...
DejDim Posted December 25, 2019 Share Posted December 25, 2019 I have the same problem. K95 RGB Platinium I have set CTRL+9 for Microphone Mute (G6) and CTRL+8 for Speaker Mute (G5). Now when I'm in Teamspeak or Discord and press the G6 and G5 keys they work too. But if I press ESC my microphone is muted and if I press F1 my speaker is muted. If the Icue software is switched off and he uses the hardware profiles he doesn't do that anymore and everything works fine again. I have deleted the memory from the K95 and all profiles, and I have also completely reinstalled the software. Translated with http://www.DeepL.com/Translator (free version) Link to comment Share on other sites More sharing options...
c-attack Posted December 25, 2019 Share Posted December 25, 2019 See below. https://forum.corsair.com/v3/showthread.php?t=192535 Link to comment Share on other sites More sharing options...
DejDim Posted December 25, 2019 Share Posted December 25, 2019 See below. https://forum.corsair.com/v3/showthread.php?t=192535 Thanks for the quick answer. I'll test it later Link to comment Share on other sites More sharing options...
Recommended Posts