Jump to content
Corsair Community

750D Top radiator mount


L003sgh

Recommended Posts

  • 6 months later...
Yes, you can install the h100i. The 750d will fit a 240mm, 280mm, and 360mm radiator.

 

Yep, and inofficially you can easily fit a 420mm (3x140) radiator up top as well, as long as you don't mind losing your top drive bay and bending the top two tabs in the drive cage.

 

Just don't go with a much radiator thicker than 45mm, or once you add a typical 25mm fan, it will likely interfere with motherboard components. 60mm thick definitely won't work unless you plan on going fanless :p

 

120mm radiators might be able to be thicker, because they ahve more clearance on the bottom for various caps and other motherboard components to fit, but it's going to be on a case by case basis.

Link to comment
Share on other sites

  • 4 years later...
Would a 60mm thick 360mm Radiator (Phobya G-Changer 360 V.2) fit if i put the Fans ontop of the Radiator (from the outside of the Case)? So that the Fans pull the Air through the Radiator? And would there be enough space in the Drive bay for a EK Waterblock spin bay (Dual 5 1/4" reservoir)? It is only 65mm deep.
Link to comment
Share on other sites

×
×
  • Create New...