Whisky Lima Posted March 28, 2018 Share Posted March 28, 2018 I have made a custom lighting effect for the LNP and two of my LED strips use a copy of the same ripple effect. When the profile starts, they are in sync but slowly they will slip out of sync. The effect was copied so the timing etc is identical. Thanks Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted March 29, 2018 Corsair Employee Share Posted March 29, 2018 Give me the profile, I'll check. Link to comment Share on other sites More sharing options...
Whisky Lima Posted March 29, 2018 Author Share Posted March 29, 2018 Hi James, I have included a link below. It is the strips on the LNP Channel 1 that have the issue. I can specifically see the problem between strip 4 and 5 which are mounted top and bottom of my monitor. It does take some time but eventually will start to slip out of time. https://ufile.io/xd80q EDIT: I have just experienced it again and on closer inspection, it effects all other the LED strips and the HD120 Fans. It take about an hour before it becomes noticeable. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.