hasgood Posted June 12, 2013 Share Posted June 12, 2013 Hi all, I don't know what's safe and what isn't safe, or what's ideal and what isn't ideal, in terms of coolant temperatures for the H100i. Right now, at full load the Coolant temp is 35.6 C, and the CPU Core temp is bouncing around 75 C. On idle, it's about 30 C, and the CPU Core temp is between 33-38. I am trying to make a custom curve for my H100i through CorsairLink2, and this information could go along way toward extending the longevity of my build! Thank you. Link to comment Share on other sites More sharing options...
wytnyt Posted June 12, 2013 Share Posted June 12, 2013 these temps are like many here thats using the 3770k ideally one would like to top out somewhere in the 60's but yours is tolerable i clocked my cpu at 4.3 with load temps in high 50's but id say thats a bit better than normal. yours is ok Link to comment Share on other sites More sharing options...
hasgood Posted June 12, 2013 Author Share Posted June 12, 2013 Thanks for the quick response. What are your coolant temps like, in idle and in full load, if you don't mind me asking? Link to comment Share on other sites More sharing options...
wytnyt Posted June 12, 2013 Share Posted June 12, 2013 after a 30min. on prime 95 my hydro temp will run around 36-37c and cpu temp hangs around mid-high 50's and jump to 60 for a second and then fall to high 50's fans around 1500 but all units arent the same,some are better as some are not. Link to comment Share on other sites More sharing options...
hasgood Posted June 12, 2013 Author Share Posted June 12, 2013 What about coolant temps? Link to comment Share on other sites More sharing options...
wytnyt Posted June 12, 2013 Share Posted June 12, 2013 What about coolant temps? sorry,i fixed it in my prior post. Link to comment Share on other sites More sharing options...
hasgood Posted June 12, 2013 Author Share Posted June 12, 2013 Thanks! Much Appreciated! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.