will_s Posted January 22, 2020 Share Posted January 22, 2020 (edited) Hydro X Series XC7 RGB CPU Water Block Hydro X Series XG7 RGB 20-series GPU Water Block Hydro X XD5 RGB Reservoir/Pump Commander Pro Is this the way it is suppose to work.... 1/ Daisy Chain XC7 CPU RGB to the XG7 GPU RGB 2/ Daisy Chain that to XD5 Reservoir 3/ Attach the other cable from the XD5 into the Commander Pro LED channel Now that will give me control via iCUE and the color effects will be the same for all RGBs on the pump, GPU and CPU btw: do I have to connect anything to the motherboard CPU fan headers or is that done by the USB device? Edited January 22, 2020 by will_s Link to comment Share on other sites More sharing options...
hquest Posted January 22, 2020 Share Posted January 22, 2020 Yes, that is the correct order, because the GPU is the only with two RGB wires. Here is how you would set it up on iCue (reverse, but you got it right). Set the lightning channel as "Hydro X Series", then set the pump, the GPU, then the CPU block. Other than the Commander Pro USB header, no other wires needs to be plugged into the motherboard. You still need power cables, though, for the pump and fans. Link to comment Share on other sites More sharing options...
will_s Posted January 22, 2020 Author Share Posted January 22, 2020 I think I may have to go into BIOS and shut off something for cpu warning or plug an ordinary fan into it Link to comment Share on other sites More sharing options...
Caedhros Posted January 22, 2020 Share Posted January 22, 2020 Yes you will need to turn off the CPU fan warning in your BIOS Link to comment Share on other sites More sharing options...
Recommended Posts