capricorn123290 Posted September 20, 2020 Share Posted September 20, 2020 the temperature sensor is plugged into port 1 on the commander pro and it is the only sensor plugged in. I am unable to set custom fan curves for the pump as it says that I need to plug the sensor into port one (it is). the commander pro is showing a temperature on the commander pro status screen along with the three voltages 3.3,5 and 12v. I take this to mean that it is indeed reading the sensor. Is there something I'm missing to get it to recognize the temp probe? Link to comment Share on other sites More sharing options...
capricorn123290 Posted September 20, 2020 Author Share Posted September 20, 2020 for the XD5 pump if I wasn't' clear Link to comment Share on other sites More sharing options...
c-attack Posted September 20, 2020 Share Posted September 20, 2020 It seems like you are stuck in the Hydro X “tuning”. The custom curves don’t care what you pick for the sensor and it doesn’t have to be in slot 1. Performance tab, click + to create a new curve. A graph will appear below. In the Sensor drop menu, scroll until you find Commander Pro Temp #1. Now set the temp/speed points. Don’t forget to apply the curve to the pump. Both will be yellow when active. Link to comment Share on other sites More sharing options...
capricorn123290 Posted September 20, 2020 Author Share Posted September 20, 2020 That got it! I didn't realize that I had to add another curve as I thought something was not reading. I was going of the fact that I couldn't use the presets. Thanks for the help. Link to comment Share on other sites More sharing options...
Recommended Posts