war1122 Posted February 20, 2019 Share Posted February 20, 2019 So this past weekend I bought a H100i Platinum, and lo and behold, once i install it, the cpu block lights appear to be dead. At a loss of what i should be doing. They don't even light up the default Rainbow color as most corsair products do. Theres also a separate issue, every time i launch rust or play certain games, I get blue screens, such as; IRQL_NOT_LESS_OR_EQUAL Memory management and KERNEL_SECURITY_CHECK_ERROR If it matters, I also bought some new Vengeance PRO RGB ddr4. Unsure if the two are related or... yeah. I'm at a loss, and customer support did not respond to my troubleshooting of the h100i yet, and i have yet to bring up my ram. Not sure if I'd need to RMA any of this, but if you have any ideas of what i should do or swap out. Let me know. ASUS strix b250h gtx 1080 Core i5 7500 40 gb ddr4 Thermaltake 500w Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Jam Posted February 21, 2019 Corsair Employee Share Posted February 21, 2019 Do you have your cooler's SATA power hooked up directly into your PSU's SATA power? If you're using a Molex to SATA adapter, this will NOT work. I would also reseat the RAM. These errors are typically RAM related. Link to comment Share on other sites More sharing options...
war1122 Posted February 21, 2019 Author Share Posted February 21, 2019 I do have my SATA power hooked up directly to my PSU, and I did reseat the RAM, I'm unsure as if the errors have gone away completely. I did find out an old stick of mine was dying so I swapped it. As for my pump, still no LED on the waterblock. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.