C9hris Posted January 17, 2011 Share Posted January 17, 2011 Hello! I use CMZ8GX3M2A1600C8 with the Gigabyte GA-P67A-UD4?Will it work perfectly? greetings chris Link to comment Share on other sites More sharing options...
Wired Posted January 17, 2011 Share Posted January 17, 2011 http://www.corsair.com/vengeance-8gb-dual-channel-ddr3-memory-kit-cmz8gx3m2a1600c8.html Yes Link to comment Share on other sites More sharing options...
C9hris Posted January 17, 2011 Author Share Posted January 17, 2011 Did you test it? Link to comment Share on other sites More sharing options...
Wired Posted January 17, 2011 Share Posted January 17, 2011 Corsair's website guarantees it, and I've also talked with Corsair employees who also guarantee it. Just keep in mind you'll have to OC a bit to allow the memory controller to run memory @ 1600 MHz, but that's nothing new. Link to comment Share on other sites More sharing options...
C9hris Posted January 17, 2011 Author Share Posted January 17, 2011 Thank you,good to hear I will order the Kit today Link to comment Share on other sites More sharing options...
C9hris Posted May 12, 2011 Author Share Posted May 12, 2011 I have a problem since I replaced my Mainboard I`cant use the kit in Dual Channel Mode.My Computer keep restarting endless.I´m using optimized defaults settings in BIOS.I replaced the kit 2 two times.I have also replaced the CPU My Computer keep restarting endless System Gigabyte GA-P67A-UD4-B3 Bios F3 (latest BIOS) Intel Core i7-2600K @3,4 Ghz CMZ8GX3M2A1600C8 ver2.12 Gainward GeForce GTX 570 Phantom Enermax PRO87+ 600W ATX 2.3 (EPG600AWT) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 12, 2011 Corsair Employee Share Posted May 12, 2011 Please test it with just one module at a time and please if its stable with one module get the latest BIOS from Gigabyte and then load setup defaults and enable XMP should be all you have to do! Link to comment Share on other sites More sharing options...
C9hris Posted May 12, 2011 Author Share Posted May 12, 2011 I already have the latest Bios (f3) have tried it with one Modul and i also load the X.M.P. Profile.But the Computer still restarting endlessly. Link to comment Share on other sites More sharing options...
peanutz94 Posted May 12, 2011 Share Posted May 12, 2011 Sounds like a power supply or maybe MB. I highly doubt that it would be memory related if you have already replaced the kit twice already. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 12, 2011 Corsair Employee Share Posted May 12, 2011 Have you spoke to Gigabyte and see what they suggest? It would be unlikely that all of the modules would be failing? Or can you test them in another system? Link to comment Share on other sites More sharing options...
C9hris Posted May 12, 2011 Author Share Posted May 12, 2011 I forget to write.The Kit work if a use the Ram Slot 1 & 2 (single channel mode)I will replace the Power Supply next week.I hope it finaly work again. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 12, 2011 Corsair Employee Share Posted May 12, 2011 Get the system stable with only one module and ask Gigabyte if they have a BIOS update if not its either the MB, CPU or PSU and testing in another system will help to isolate the problem. Link to comment Share on other sites More sharing options...
C9hris Posted May 13, 2011 Author Share Posted May 13, 2011 My System is stable in singel channel Configuration.I will contact Gigabyte a second time. Did Corsair test the CMZ8GX3M2A1600C8 and Gigabyte GA-P67A-UD4-B3 in Dual Channel Configuration? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 17, 2011 Corsair Employee Share Posted May 17, 2011 Yes it should not matter about the MB they are all the same chipset and should work the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.