The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Memory

Thread Tools Search this Thread Rate Thread Display Modes
Old 06-14-2019, 12:13 AM
ldwilliams ldwilliams is offline
Registered User
Join Date: Jun 2019
Posts: 8
POST ID # = 1007933
ldwilliams Reputation: 10
Default Die versions etc

I found this thread on overclocking that looks to give a ton of info on Corsair Die versions etc

"Version Number"

Corsair sticks identify the IC with a 'version number' on the label such as "ver 4.31" - props to them for this as it helps even less knowledgeable users to match kits when adding more sticks retroactively. The DDR4 numbers aren't officially documented, but they follow the same pattern as DDR3.

The numbers take the for "ver X.YZ" where;
* X is IC maker - 3 for Micron, 4 for Samsung, 5 for Hynix, presumably 8 for Nanya as with DDR3
* Y seems to be capacity per rank - 1 for 2GB, 2 for 4GB, 3 for 8GB. Usually this translates directly to IC density (8GB/rank = 8Gbit), but ver 4.14 which uses half as many double width "x16" 4Gbit chips is a special case.
* Z is revision, usually starting from A=0 and usually counting up one letter per increment. Hynix's first revisions are lettered "M" which is numbered as X.Y9, samsung now do this too and it will proesumably be the same.

The known and possible version numbers are as follows;
Version Vendor IC Confirmation?
3.20 Micron 4Gbit Rev.A Presumed
3.21 Micron 4Gbit Rev.B Confirmed
3.22 Micron 4Gbit Rev.E* Speculated
3.22 Micron 4Gbit Rev.F* Confirmed
3.31 Micron 8Gbit Rev.B Confirmed
3.33 Micron 8Gbit Rev.D Presumed
3.34 Micron 8Gbit Rev.E Speculated
4.14 Samsung 4Gbit D-die (4x16) Confirmed
4.23 Samsung 4Gbit D-die Confirmed
4.24 Samsung 4Gbit E-die Confirmed
4.31 Samsung 8Gbit B-die Confirmed
4.49 Samsung 16Gbit M-die Speculated
4.40 Samsung 16Gbit A-die Speculated
5.29 Hynix 4Gbit MFR Confirmed
5.20 Hynix 4Gbit AFR Confirmed
5.21 Hynix 4Gbit BJR Speculated
5.39 Hynix 8Gbit MFR Confirmed
5.30 Hynix 8Gbit AFR Presumed
5.31 Hynix 8Gbit "BFR"??? Speculated
5.32 Hynix 8Gbit CJR Presumed
8.20** Nanya 4Gbit Rev.A Speculated
8.30** Nanya 8Gbit Rev.A Speculated

*Rev.F is confirmed to come in ver3.22 sticks, but that doesn't leave a gap for Rev.E. It's wildly guessed that they may both appear under 3.22.
**It's unknown if Corsair even use Nanya for DDR4 but the version number it would likely be if they did is included for completeness
Date code

The first 4 digits of a Corsair serial number are a date code in the form yyww, eg 1528 is week 28 2015
Reply With Quote

Old 06-14-2019, 01:35 AM
emissary42's Avatar
emissary42 emissary42 is offline
Registered User
emissary42's PC Specs
Join Date: Aug 2013
Location: Nehr'esham
Posts: 989
POST ID # = 1007937
emissary42 emissary42 Reputation: 122

Unless Corsair deviates from its standard version scheme they use since DDR3 and once you figured it out, there is no reason to speculate on these as the assignment is quite logical for the most part.

With that being said some of the Micron versions look a bit off to me and die revision = 9 was reserved for Hynix M-Die (MFR) and Samsung Q-Die in the past. So Samsung 16Gbit M-Die might be the only thing we can not yet be 100% sure about, since it is a completely new die revision for them. It is possible though, that it is the Q-Die replacement and therewith will get the 9 from Corsair.
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 04:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.