Tomc611 Posted October 30, 2019 Share Posted October 30, 2019 I have a Spec DELTA - RGB case with 3 RBG fans, a Corsair H100i cooling / fan system inside also, connected to a Aorus Z390 Pro but the case RGB fans are not showing on iCUE and as such will not change colour at all. They are just stuck on orange. Any ideas for help? Thanks Link to comment Share on other sites More sharing options...
DevBiker Posted October 31, 2019 Share Posted October 31, 2019 The SPEC Delta fans are 12V analog RGB. iCUE doesn't control them. They should be on the 12V header on the motherboard. Link to comment Share on other sites More sharing options...
CptKidd710 Posted September 15, 2020 Share Posted September 15, 2020 (edited) The Motherboards own RGB software controls it. Each one is specific. But I got A problem Mine exact same case is having an issue with changing colors the bottom fan will be a different color even though they are daisy chained to one 12v rgb header on my MSI Tomahawk b450 board I can only use red. Edited September 15, 2020 by CptKidd710 Link to comment Share on other sites More sharing options...
CptKidd710 Posted September 15, 2020 Share Posted September 15, 2020 Like what the heck.. I'm confused completely.. Bad connection maybe? Link to comment Share on other sites More sharing options...
LeDoyen Posted September 15, 2020 Share Posted September 15, 2020 very likely to be a bad connexion but it's easier to troubleshoot than ARGB. you have one pin for 12V and one pin for each primary color. if you can only set that fan to red, it is most likely not receiving signal for the two other colors. Check you didn't plug this one backwards too. Link to comment Share on other sites More sharing options...
Recommended Posts