-sonoma- Posted August 31, 2018 Share Posted August 31, 2018 I have use my Commander Pro to manage the fan for my 1080ti SC2 Hybrid and iCue stopped seeing the GPU temps and thus speeding up the fan when the temp gets higher. Is there any fix for this or does anyone have a link to the previous release? Link to comment Share on other sites More sharing options...
c-attack Posted August 31, 2018 Share Posted August 31, 2018 These things are not typically version specific in relation to missing data. Sometimes when iCUE crashes or the service fails to restart (like on wake), it will scramble the dashboard. A full restart of both iCUE and the two services usually fixes it (or restart the system). However, sometimes the improper layout gets saved and your stuck. Select the Dashboard (+) menu, then System Info. Make sure your GPU is selected. If it is there and checked, try deselecting it then re-selecting. Other motherboard info missing? Link to comment Share on other sites More sharing options...
-sonoma- Posted August 31, 2018 Author Share Posted August 31, 2018 That's the thing, it doesn't seen it under System Info at all, even after restart. It sees my Intel integrated graphics but not my 1080ti. I'll try uninstalling and reinstalling both drivers i guess, but it definitely showed up in the previous version Link to comment Share on other sites More sharing options...
DevBiker Posted September 1, 2018 Share Posted September 1, 2018 Another thing that you could do is to put one of the Commander Pro's thermistors in the exhaust stream of the radiator for the GPU. It'll give you a good idea of the coolant temperature (within ~0.5C) and then you can use that for fan speed control. And, in all honesty, it'd probably be a better control variable anyway. Link to comment Share on other sites More sharing options...
-sonoma- Posted September 2, 2018 Author Share Posted September 2, 2018 I will try that. Do you know where I can find a link to the previous version? I'd rather just revert back and skip a version Link to comment Share on other sites More sharing options...
screwtech02 Posted September 8, 2018 Share Posted September 8, 2018 Appears there is no monitoring capabilities for multiple AMD cards as well. Nothing is showing up in the system information drop down related to GPU. Link to comment Share on other sites More sharing options...
-sonoma- Posted September 12, 2018 Author Share Posted September 12, 2018 yea i reverted back to 3.5.111, only way to get it to work.. except now it stopped recognizing my K70 jeez sometimes i miss LINK Link to comment Share on other sites More sharing options...
SajuukCor Posted September 12, 2018 Share Posted September 12, 2018 Same issue I'm having with my SSDs not showing up in 3.6. Had to go back to 3.5. Link to comment Share on other sites More sharing options...
screwtech02 Posted September 12, 2018 Share Posted September 12, 2018 Where you guys getting 3.5 from to DL? Link to comment Share on other sites More sharing options...
screwtech02 Posted September 12, 2018 Share Posted September 12, 2018 3.799 also will not detect multiple AMD cards.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.