JimP Posted May 17, 2012 Share Posted May 17, 2012 Anyone have a clearance /air flow problem mounting a A-70 Air Cooler on a AM3+ board? It is a top facing (exhaust) mount on the AMD3+ , fairly close to the 200mm top exhaust fan. I was thinking of replacing the 200mm with 2 top case mount Corsair 120mm LED fans. But I don't know which Corsair fans are best for a horizontal mount on top. I am waiting on all my parts to arrive , just thinking it out. Suggestions please. My first build and I would prefer to stick with Corsair parts. Thanks in advance for advise. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 22, 2012 Corsair Employee Share Posted May 22, 2012 It should be fine, there should be at least an inch clearance. Link to comment Share on other sites More sharing options...
JimP Posted August 10, 2012 Author Share Posted August 10, 2012 Sorry, No. Very little clearance. 1/2" or less. I removed the 200mm, replaced it with 2-120mm Corsair AF High Performance fans under top dust cover. Now it works good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.